(Programming) PPRNG 1.15.0 (Mac) - Page 16

Prog89 · Sep 13th, 2012, 10:45:18 PM

There are avaliable guides about RNG with the Dream Radar/AR Searcher?

chiizu · Sep 14th, 2012, 12:13:22 AM

Quote:

Originally Posted by Fat Prog89

There are avaliable guides about RNG with the Dream Radar/AR Searcher?

I am working on a guide, but it is not finished yet. The beginning of the guide is currently in the second post of this thread, and the final guide will be in one of the first few posts of this thread when it is finished.

Prog89 · Sep 18th, 2012, 4:25:33 AM

Thank you!
Sorry I have another question, I just tried your method for the hidden hollow. I had success and find the pokemon I was looking for!

I red that it is possible to find Eevee in every hidden hollow but he is very rare, is it a fake?
Because I can't find Eevee in your correct table.

chiizu · Sep 18th, 2012, 8:44:17 AM

Quote:

Originally Posted by Fat Prog89

Thank you!
I red that it is possible to find Eevee in every hidden hollow but he is very rare, is it a fake?
Because I can't find Eevee in your correct table.

This is stated on sites like Serebii, however nobody has been able to prove that it is actually true. At this time we don't think it's possible.

Prog89 · Sep 18th, 2012, 1:21:55 PM

Quote:

Originally Posted by Fat chiizu

This is stated on sites like Serebii, however nobody has been able to prove that it is actually true. At this time we don't think it's possible.

Yes i found it on serebii but my friends and I have never find any Eevee, I think it's not possible too.

procrastinatinpro · Sep 21st, 2012, 1:30:47 AM

I am able to find values for hex flawless Dittos using RNG Reporter but I can't seem to find that seed on PPRNG. I'm using the same DS Parameters. I must not be using the Standard Seed finder right. I would definitely love to use this program instead because then I wouldn't need to boot up Windows. I like the layout of this one as well :)

Do I have to re-calibrate my DS for PPRNG or something?

chiizu · Sep 21st, 2012, 3:36:18 AM

I

Quote:

Originally Posted by Fat procrastinatinpro

I am able to find values for hex flawless Dittos using RNG Reporter but I can't seem to find that seed on PPRNG. I'm using the same DS Parameters. I must not be using the Standard Seed finder right. I would definitely love to use this program instead because then I wouldn't need to boot up Windows. I like the layout of this one as well :)

Do I have to re-calibrate my DS for PPRNG or something?

Parameters are only related to your DS / cartridge combination. They do not change between RNG programs.

Please post your parameters and details of what results RNG Reporter is giving you. Screenshots would be easiest.

procrastinatinpro · Sep 21st, 2012, 4:03:12 AM

Quote:

Originally Posted by Fat chiizu

I

Parameters are only related to your DS / cartridge combination. They do not change between RNG programs.

Please post your parameters and details of what results RNG Reporter is giving you. Screenshots would be easiest.

Sure. I used the same parameters that appear on top of the PPRNG window when I used RNG Reporter. Sorry that the pics are a bit large...

...

**religiousjedi** · Sep 21st, 2012, 4:28:05 AM

This may be a silly question...but did you adjust the date in PPRNG to match the seed you found in RNG Reporter?

procrastinatinpro · Sep 21st, 2012, 4:35:09 AM

Quote:

Originally Posted by Fat religiousjedi

This may be a silly question...but did you adjust the date in PPRNG to match the seed you found in RNG Reporter?

The date of the seed is 11/9/11 which I included in the search on PPRNG.

chiizu · Sep 21st, 2012, 7:56:02 AM

Quote:

Originally Posted by Fat procrastinatinpro

Sure. I used the same parameters that appear on top of the PPRNG window when I used RNG Reporter. Sorry that the pics are a bit large...

Your timer0 doesn't look correct in PPRNG. The leading '1' could be getting cut off, but I think there's enough space there to display it if you had actually set your timer0 to 12BB - 12BC.

If it just is not showing the '1' in PPRNG but it is actually set, please give screenshots of the config screens in PPRNG and Reporter.

procrastinatinpro · Sep 21st, 2012, 1:57:19 PM

Quote:

Originally Posted by Fat chiizu

Your timer0 doesn't look correct in PPRNG. The leading '1' could be getting cut off, but I think there's enough space there to display it if you had actually set your timer0 to 12BB - 12BC.

If it just is not showing the '1' in PPRNG but it is actually set, please give screenshots of the config screens in PPRNG and Reporter.

There's the problem. It looks like the Timer0 is sometimes changing itself or not saving properly when I edited the DS config (I did edit it multiple times yesterday to add in the other parameters). Maybe it's related to that last known issue.

Either way, now it comes up with the same seed. Thanks!

NathanTea · Oct 3rd, 2012, 8:14:13 AM

Is it possible to use the same DS parameters for my B&W2 copy that I used for my B&W1 or do I have to find the parameters again?

chiizu · Oct 3rd, 2012, 10:18:32 AM

Quote:

Originally Posted by Fat NathanTea

Is it possible to use the same DS parameters for my B&W2 copy that I used for my B&W1 or do I have to find the parameters again?

You will have to find your parameters again, but the next version of PPRNG (to be released as soon as we have details necessary for the English versions) will support a new and much easier method for finding B2/W2 parameters. See the 4th post of this thread for more details.

chiizu · Oct 7th, 2012, 12:43:10 PM

PPRNG has been updated to version 1.14.0, including initial support for the English language versions of Black 2 and White 2 on DS and DS Lites.

Please see the first post of this thread for details, a download link, and links to tutorials on the new Black 2 / White 2 features.

ShadowAssailant · Oct 7th, 2012, 5:42:26 PM

TID searcher broken?

chiizu · Oct 7th, 2012, 5:46:49 PM

Quote:

Originally Posted by Fat ShadowAssailant

TID searcher broken?

You will really need to explain what you are referring to.

ShadowAssailant · Oct 7th, 2012, 5:57:35 PM

Sorry. I was expecting it to be deleted like my last post (the last post had reason, though).

I managed to abuse my TID/SID in Black, so I know the process. I have already found my parameters using the awesome new method.

Sooo. I started the game up. Kept track of my starting time and date. Didn't hold down any buttons. I started the game and waited til the Gamefreak animation to press start so I can skip that and the little cutscene video thereafter so I can go to the menu. I started, put in a Random name for myself and my Rival. Waited for my mother to talk to Juniper. Immediately when I could move, I checked my TID. I put it in the searcher along with all the other data and nothing. Didn't even appear to search at all. So I don't know what's wrong. If you need any more specific data, let me know.

Screenshot

Also, the links on the first post that say BW1/BW2/common functions all lead to the same link. The one about BW2 specific things.

chiizu · Oct 7th, 2012, 6:07:10 PM

Quote:

Originally Posted by Fat ShadowAssailant

I managed to abuse my TID/SID in Black, so I know the process. I have already found my parameters using the awesome new method.

Sooo. I started the game up. Kept track of my starting time and date. Didn't hold down any buttons. I started the game and waited til the Gamefreak animation to press start so I can skip that and the little cutscene video thereafter so I can go to the menu. I started, put in a Random name for myself and my Rival. Waited for my mother to talk to Juniper. Immediately when I could move, I checked my TID. I put it in the searcher along with all the other data and nothing. Didn't even appear to search at all. So I don't know what's wrong. If you need any more specific data, let me know.

You have only one Timer0 value configured. You need to do the parameter calibration a number of times to get the full range of Timer0 values. You are hitting an adjacent seed, but because you only have one Timer0 value configured it's not finding it.

Quote:

Originally Posted by Fat ShadowAssailant

Also, the links on the first post that say BW1/BW2/common functions all lead to the same link. The one about BW2 specific things.

Fixed, thanks.

ShadowAssailant · Oct 7th, 2012, 6:17:35 PM

Ohhh. Okay. Timer0's are more mean in these games then? Uhg. Okay. Thanks a bunch. :)

-Edit: Is it okay, then, to just leave the TID/SID searcher window open as I find the other Timer0's and then press search when I find them?

And I know the title says not to do this, but can I have a quick yes or no for this question?
I want to know if Dream Radar seeds can be used to get a TID/SID combo that will work for a specific DR seed.

chiizu · Oct 7th, 2012, 7:34:41 PM

Quote:

Originally Posted by Fat ShadowAssailant

Is it okay, then, to just leave the TID/SID searcher window open as I find the other Timer0's and then press search when I find them?

After updating your profile, you should rechoose it from the drop down menu in the TID searcher to get the updated values.

Quote:

Originally Posted by Fat ShadowAssailant

I want to know if Dream Radar seeds can be used to get a TID/SID combo that will work for a specific DR seed.

DR Pokemon can't be shiny.

Mr. Sableye · Oct 7th, 2012, 7:45:59 PM

I'm not finding any results under the ID Frame Search.

At first I did it with my calibrated parameters, then I tried it with a huge range of Timer0s (1000 - 1100). It found nothing (I even deselected the date).

Tried multiple times with no avail. (trying to RNG my ID)

Also, this is in English White 2 on a DS Lite.

chiizu · Oct 7th, 2012, 8:20:55 PM

Quote:

Originally Posted by Fat Mr. Sableye

I'm not finding any results under the ID Frame Search.

At first I did it with my calibrated parameters, then I tried it with a huge range of Timer0s (1000 - 1100). It found nothing (I even deselected the date).

Tried multiple times with no avail. (trying to RNG my ID)

Also, this is in English White 2 on a DS Lite.

Please give me a screenshot of the searcher window so I can see some details.

Mr. Sableye · Oct 7th, 2012, 8:30:49 PM

Quote:

Originally Posted by Fat chiizu

Please give me a screenshot of the parameter searcher window so I can try to reproduce it. There does appear to be a bug in the parameter searcher at the moment.

Here's a SS of an attempt of mine:

...

(I tried configuring PPRNG to just try any viable parameters as a proof of concept, 30420 was a REAL result from starting a fresh game at that time, though)

The seed and related info of what I was trying to hit:
Date: 2012/10/07
Time: 09:53:43
Frame: 33
TID: 13337
SID: 61139
Seed: 943B0AFBA1880B5A

EDIT: Here's a screenshot of searching for the ID and not being able to find it.

...

EDIT2: Interesting. Restarted PPRNG and the search worked on the first and second try, but failed on the third (and subsequent tries).

Cefiro · Oct 7th, 2012, 11:41:52 PM

Anything like this for PC yet?

Sep 21st, 2012, 4:28:05 AM	#384
religiousjedi Curse you Arkeis and your BabbyChomp! <3 Moderator Join Date: Oct 2010 Posts: 1,414	This may be a silly question...but did you adjust the date in PPRNG to match the seed you found in RNG Reporter? __________________ Jedi! Navi! Cereza! ☁ PPRNG Guide (Awaiting GP Checks) Beware!

Oct 3rd, 2012, 8:14:13 AM	#388
NathanTea Join Date: May 2012 Posts: 10 Guam	Is it possible to use the same DS parameters for my B&W2 copy that I used for my B&W1 or do I have to find the parameters again? __________________ 2012 Spring Friendly Wifi Tournament: 29th Place (1884 Rating) Guam New Box Seats Tournament (VGC12): 1st Place Advocate for bringing VGC to Guam!

Oct 7th, 2012, 7:45:59 PM	#397
Mr. Sableye Join Date: Apr 2009 Posts: 408 Weaknesses, I...	I'm not finding any results under the ID Frame Search. At first I did it with my calibrated parameters, then I tried it with a huge range of Timer0s (1000 - 1100). It found nothing (I even deselected the date). Tried multiple times with no avail. (trying to RNG my ID) Also, this is in English White 2 on a DS Lite. __________________ Here's a signature, I hope you enjoy it.

Oct 7th, 2012, 11:41:52 PM	#400
Cefiro Join Date: Feb 2011 Posts: 140	Anything like this for PC yet? __________________ Pokemon Diamond Friend Code: 1678 2454 2881

Sep 13th, 2012, 10:45:18 PM	#376
Prog89 Join Date: Apr 2012 Posts: 19 Pavia, Italy	There are avaliable guides about RNG with the Dream Radar/AR Searcher?

Sep 18th, 2012, 4:25:33 AM	#378
Prog89 Join Date: Apr 2012 Posts: 19 Pavia, Italy	Thank you! Sorry I have another question, I just tried your method for the hidden hollow. I had success and find the pokemon I was looking for! I red that it is possible to find Eevee in every hidden hollow but he is very rare, is it a fake? Because I can't find Eevee in your correct table.

Sep 21st, 2012, 1:30:47 AM	#381
procrastinatinpro Join Date: Aug 2012 Posts: 8	I am able to find values for hex flawless Dittos using RNG Reporter but I can't seem to find that seed on PPRNG. I'm using the same DS Parameters. I must not be using the Standard Seed finder right. I would definitely love to use this program instead because then I wouldn't need to boot up Windows. I like the layout of this one as well :) Do I have to re-calibrate my DS for PPRNG or something?

Oct 7th, 2012, 12:43:10 PM	#390
chiizu PPPPPPPPPPPPPPPPPPPPPPPPP RNG Join Date: Nov 2010 Posts: 369	PPRNG has been updated to version 1.14.0, including initial support for the English language versions of Black 2 and White 2 on DS and DS Lites. Please see the first post of this thread for details, a download link, and links to tutorials on the new Black 2 / White 2 features.

Oct 7th, 2012, 5:42:26 PM	#391
ShadowAssailant Join Date: Apr 2012 Posts: 29 USA	TID searcher broken?

Oct 7th, 2012, 5:57:35 PM	#393
ShadowAssailant Join Date: Apr 2012 Posts: 29 USA	Sorry. I was expecting it to be deleted like my last post (the last post had reason, though). I managed to abuse my TID/SID in Black, so I know the process. I have already found my parameters using the awesome new method. Sooo. I started the game up. Kept track of my starting time and date. Didn't hold down any buttons. I started the game and waited til the Gamefreak animation to press start so I can skip that and the little cutscene video thereafter so I can go to the menu. I started, put in a Random name for myself and my Rival. Waited for my mother to talk to Juniper. Immediately when I could move, I checked my TID. I put it in the searcher along with all the other data and nothing. Didn't even appear to search at all. So I don't know what's wrong. If you need any more specific data, let me know. Screenshot Also, the links on the first post that say BW1/BW2/common functions all lead to the same link. The one about BW2 specific things.

Oct 7th, 2012, 6:17:35 PM	#395
ShadowAssailant Join Date: Apr 2012 Posts: 29 USA	Ohhh. Okay. Timer0's are more mean in these games then? Uhg. Okay. Thanks a bunch. :) -Edit: Is it okay, then, to just leave the TID/SID searcher window open as I find the other Timer0's and then press search when I find them? And I know the title says not to do this, but can I have a quick yes or no for this question? I want to know if Dream Radar seeds can be used to get a TID/SID combo that will work for a specific DR seed.