5th Gen PRNG Help / Info - RNG Reporter 9.96.5, PPRNG 1.15.0 (Request in first post) - Page 689

Mo96 · Nov 25th, 2012, 5:52:57 AM

Mo96 · Nov 25th, 2012, 5:54:58 AM

I am using Cresselia on Marvelous Bridge for calibration. I am also aiming for a flawless one. The only problem is that no seeds are generated when I hit search.
Version: Black 2
DS Type: 3DS
Language: English

Sparko33 · Nov 25th, 2012, 9:52:30 AM

Just to be sure, when attempting to RNG for the Larvesta egg given to you in White 1, do I set my min/max frame to 1/1, while checking the 'larvesta egg' encounter type?
I read the starting IV frame is 2, so its somewhat puzzling me :x

kiddu · Nov 25th, 2012, 12:21:11 PM

Quote:

Originally Posted by Fat Mo96

Way too small.

And to be clear, Cereza meant the time when you select the game from the 3DS menu, not when you select Continue in-game.

Cipher Admin Lovrina · Nov 25th, 2012, 1:11:27 PM

Are there any areas without wandering NPCs in White 2 where you can catch a Petilil?

Cereza · Nov 25th, 2012, 1:36:44 PM

Castelia Park

steppes · Nov 25th, 2012, 1:55:35 PM

Quote:

Originally Posted by Fat Cereza

The best way to think of it is by using the formula Chatters=Target Frame-Current frame.

If there are no WNPCs in the area then Current frame=Initial PIDRNG.
If there are WNPCs, you first would have to figure out what frame you land on when you enter the game--this is to see how many frames the NPCs will advance for you--, and move from there.

However, sometimes WNPCs mode differently depending on what frame you are, so some inconsistencies can occur here and there. But the formula works as a rule of thumb

So, using my screenshot as an example, if I'm in an area with no WNPCs and I want my pokémon to be Timid, I just need to enter the battle since my starting frame is 59, whereas if I wanted my pokémon to be bashful I'd have to advance the PIDRNG by 1 by listening to one Chatot cry? I'm just a little confused as to what numbers represent what.

Cereza · Nov 25th, 2012, 2:35:50 PM

Quote:

Originally Posted by Fat steppes

So, using my screenshot as an example, if I'm in an area with no WNPCs and I want my pokémon to be Timid, I just need to enter the battle since my starting frame is 59, whereas if I wanted my pokémon to be bashful I'd have to advance the PIDRNG by 1 by listening to one Chatot cry?

That's correct.

Cipher Admin Lovrina · Nov 25th, 2012, 7:08:14 PM

Do you need your SID to calibrate over Unova link? I ask because I don't have wi-fi/pokecheck to check my SID. Would I be able to just calibrate off of my White 2 now, then ID abuse so I know my SID/ID?

Champloo · Nov 25th, 2012, 7:23:41 PM

I'm guiding a friend through the RNG process and she says when she clicks generate in the time finder window she gets this:

"I press generate and a little progress bar appears, but it disapears almost instantly and I get nothing.'

She has Winows 7 and HAS installed the Frameworks listed in the first post of this thread. any ideas on what could be happening?

Cereza · Nov 25th, 2012, 7:28:45 PM

Quote:

Originally Posted by Fat Champloo

I'm guiding a friend through the RNG process and she says when she clicks generate in the time finder window she gets this:

"I press generate and a little progress bar appears, but it disapears almost instantly and I get nothing.'

She has Winows 7 and HAS installed the Frameworks listed in the first post of this thread. any ideas on what could be happening?

Maybe the ranges she's looking on are too small? Tell her to increase the number of months and advancements needed?

Champloo · Nov 25th, 2012, 7:36:49 PM

Quote:

Originally Posted by Fat Cereza

Maybe the ranges she's looking on are too small? Tell her to increase the number of months and advancements needed?

Well according to her she put in exactly what I asked her to put it, I did as well and got results, but she didn't. I thought it was the Frameworks but she installed it and Restarted her computer and continues to have the issue.

Sprocket · Nov 25th, 2012, 8:32:25 PM

I have the same problem. I have to go in and re-edit the parameters in the Time Finder window every time to get it to actually search.

Riski · Nov 25th, 2012, 9:48:02 PM

Quote:

Originally Posted by Fat Champloo

Well according to her she put in exactly what I asked her to put it, I did as well and got results, but she didn't. I thought it was the Frameworks but she installed it and Restarted her computer and continues to have the issue.

I remember having this problem when I started using the latest RNG Reporter's Parameter Finder after months of not doing any RNG. I'm trying to remember what it was that I had to change to stop the strange disappearing progress bar. The soft reset box may be it. Does she have hers clicked? Tell her to unclick it and do all of her work from a complete restart of her DS system after she sets her clock. See if that makes a difference.

Gahagan · Nov 25th, 2012, 9:54:02 PM

Quote:

Originally Posted by Fat Champloo

I'm guiding a friend through the RNG process and she says when she clicks generate in the time finder window she gets this:

"I press generate and a little progress bar appears, but it disapears almost instantly and I get nothing.'

She has Winows 7 and HAS installed the Frameworks listed in the first post of this thread. any ideas on what could be happening?

I fixed this issue last page. Go to your parameters, check all the keypress boxes. Run a search. Uncheck keypresses. You should be able to search normally after that.

Champloo · Nov 25th, 2012, 9:56:57 PM

Quote:

Originally Posted by Fat Riski

I remember having this problem when I started using the latest RNG Reporter's Parameter Finder after months of not doing any RNG. I'm trying to remember what it was that I had to change to stop the strange disappearing progress bar. The soft reset box may be it. Does she have hers clicked? Tell her to unclick it and do all of her work from a complete restart of her DS system after she sets her clock. See if that makes a difference.

Quote:

Originally Posted by Fat Gahagan

I fixed this issue last page. Go to your parameters, check all the keypress boxes. Run a search. Uncheck keypresses. You should be able to search normally after that.

Quote:

Originally Posted by Fat Sprocket

I have the same problem. I have to go in and re-edit the parameters in the Time Finder window every time to get it to actually search.

Ah okay thanks everyone. She managed to figure it out :)

Cipher Admin Lovrina · Nov 25th, 2012, 10:10:32 PM

Quote:

Originally Posted by Fat Cipher Admin Lovrina

Do you need your SID to calibrate over Unova link? I ask because I don't have wi-fi/pokecheck to check my SID. Would I be able to just calibrate off of my White 2 now, then ID abuse so I know my SID/ID?

Is it possible to id abuse in BW2 without knowing your initial SID?

pootoucher · Nov 26th, 2012, 12:36:48 AM

when searching for shiny seeds, does the shiny frame sometimes not contain theIVs that the search read it would?

The Agonist · Nov 26th, 2012, 12:41:48 AM

Quote:

Originally Posted by Fat Cipher Admin Lovrina

Is it possible to id abuse in BW2 without knowing your initial SID?

Of course, I did it on B2. All you need is your parameters.

Cipher Admin Lovrina · Nov 26th, 2012, 1:44:27 AM

Quote:

Originally Posted by Fat The Agonist

Of course, I did it on B2. All you need is your parameters.

Wonderful :)

Uiru · Nov 26th, 2012, 2:40:59 AM

So in Time Finder, do I use 1/1 or 3/3 for getting standing legendaries? Thanks.
~Uiru

**voodoo pimp** · Nov 26th, 2012, 3:49:01 AM

Quote:

Originally Posted by Fat Uiru

So in Time Finder, do I use 1/1 or 3/3 for getting standing legendaries? Thanks.
~Uiru

1/1. The frame is only 3 for the Adjacent Seed tool.

Cereza · Nov 26th, 2012, 8:59:18 AM

Quote:

Originally Posted by Fat pootoucher

when searching for shiny seeds, does the shiny frame sometimes not contain theIVs that the search read it would?

How did you look for your seed? You need to use the standard method for ivs and click on "nearby shiny frames" if you use the pid method, then you will not get the ivs you want as this method does not search for ivs

Mo96 · Nov 26th, 2012, 11:52:58 AM

I am using the latest version of RNG Reporter (9.96.5 BETA). I am trying to find my DS parameters but can't get any results. The time and date of hitting the A button on main screen is November 26th 2012 at 19:40:25. My MAC address is CC9E00FFDCCD. DS type is 3DS. I'm playing Black 2 (English). I calculated the IV range of a boldore I caught in the last cave of victory road using sweet scent.
Here it is:
18-19/25/5-7/3-4/3-5/16-17

I did not check the soft reset button.
What could I be doing wrong? I would really appreciate your help.

Slashmolder · Nov 26th, 2012, 12:05:51 PM

Here's my guesses as to what might have happened:
You took a step/did something to advance the IVRNG.
You were holding some buttons down while starting your game.
Your start time is incorrect.
Your calculated the IVs incorrectly.

Less likely but still might throw this out:
Your MAC Address is wrong
You aren't playing on an English version of Black 2 on a 3DS

To give you an idea what you should be looking for on English Black 2 on a 3DS you should see results of
actual seconds = seconds + 8, VCount = ad, Timer0 = 168a, GxStat = 6, VFrame = 8

Nov 25th, 2012, 5:54:58 AM	#17202
Mo96 Join Date: Nov 2012 Posts: 102	I am using Cresselia on Marvelous Bridge for calibration. I am also aiming for a flawless one. The only problem is that no seeds are generated when I hit search. Version: Black 2 DS Type: 3DS Language: English Last edited by Mo96; Nov 25th, 2012 at 6:35:10 AM.

Nov 25th, 2012, 1:11:27 PM	#17205
Cipher Admin Lovrina Join Date: Jun 2008 Posts: 2,024	Are there any areas without wandering NPCs in White 2 where you can catch a Petilil? __________________ Trade Thread White Code: 2193 7255 6108

Nov 25th, 2012, 7:08:14 PM	#17209
Cipher Admin Lovrina Join Date: Jun 2008 Posts: 2,024	Do you need your SID to calibrate over Unova link? I ask because I don't have wi-fi/pokecheck to check my SID. Would I be able to just calibrate off of my White 2 now, then ID abuse so I know my SID/ID? __________________ Trade Thread White Code: 2193 7255 6108

Nov 25th, 2012, 7:23:41 PM	#17210
Champloo Join Date: Aug 2009 Posts: 314 Florida	I'm guiding a friend through the RNG process and she says when she clicks generate in the time finder window she gets this: "I press generate and a little progress bar appears, but it disapears almost instantly and I get nothing.' She has Winows 7 and HAS installed the Frameworks listed in the first post of this thread. any ideas on what could be happening? __________________ Platinum FC: 1334 2826 5381 Heart Gold FC: 0646 8572 8193 Pokemon: Fated Battle\|Pokemon: Fated Encounter\|Champloo's Trading Dojo

Nov 25th, 2012, 8:32:25 PM	#17213
Sprocket Join Date: Jul 2010 Posts: 1,485 Phoenix, AZ	I have the same problem. I have to go in and re-edit the parameters in the Time Finder window every time to get it to actually search. __________________ Black FC: 2537-3042-2350 VGC2012 Analysis: Slowbro (Uploaded)

Nov 25th, 2012, 5:52:57 AM	#17201
Mo96 Join Date: Nov 2012 Posts: 102

Nov 25th, 2012, 9:52:30 AM	#17203
Sparko33 Join Date: Oct 2012 Posts: 17 Eddsworld	Just to be sure, when attempting to RNG for the Larvesta egg given to you in White 1, do I set my min/max frame to 1/1, while checking the 'larvesta egg' encounter type? I read the starting IV frame is 2, so its somewhat puzzling me :x

Nov 25th, 2012, 1:36:44 PM	#17206
Cereza Tastes Like Candy Join Date: Jan 2011 Posts: 1,142 Long Island	Castelia Park

Nov 26th, 2012, 12:36:48 AM	#17218
pootoucher Join Date: Oct 2012 Posts: 26	when searching for shiny seeds, does the shiny frame sometimes not contain theIVs that the search read it would?

Nov 26th, 2012, 2:40:59 AM	#17221
Uiru Join Date: Jan 2007 Posts: 155 the floating castle of Newfoundland	So in Time Finder, do I use 1/1 or 3/3 for getting standing legendaries? Thanks. ~Uiru

Nov 26th, 2012, 11:52:58 AM	#17224
Mo96 Join Date: Nov 2012 Posts: 102	I am using the latest version of RNG Reporter (9.96.5 BETA). I am trying to find my DS parameters but can't get any results. The time and date of hitting the A button on main screen is November 26th 2012 at 19:40:25. My MAC address is CC9E00FFDCCD. DS type is 3DS. I'm playing Black 2 (English). I calculated the IV range of a boldore I caught in the last cave of victory road using sweet scent. Here it is: 18-19/25/5-7/3-4/3-5/16-17 I did not check the soft reset button. What could I be doing wrong? I would really appreciate your help.

Nov 26th, 2012, 12:05:51 PM	#17225
Slashmolder 'Ello Governor Join Date: Mar 2011 Posts: 271	Here's my guesses as to what might have happened: You took a step/did something to advance the IVRNG. You were holding some buttons down while starting your game. Your start time is incorrect. Your calculated the IVs incorrectly. Less likely but still might throw this out: Your MAC Address is wrong You aren't playing on an English version of Black 2 on a 3DS To give you an idea what you should be looking for on English Black 2 on a 3DS you should see results of actual seconds = seconds + 8, VCount = ad, Timer0 = 168a, GxStat = 6, VFrame = 8 __________________ My Pokécheck Pokémon <~Nexus> Mat's seen things that would make you wake up screaming in the middle of the night NO MORE RNG NO MORE RNG <CDXCIV> kittens is not a Pokemon.