5th Gen PRNG Help / Info - Latest: RNG Reporter 9.96.5, PPRNG 1.15.0

OK wait so what do I exactly need to do in order to find my parameters?
1.) choose a time anytime and date ( rememeber once you the date and time keep it the same!)
2.)make sure you have a sweet scenter and saved in the grass/cave etc.
3.) set up your time and date
4.) make sure to hit your time 1 sec ahead since you have a ds lite
5.) when seeing the main screen that white saying pokemon do no press any buttons until it disappears that considered a button press...
6.)after that mash the button quickly to get through the intro and never i repeat never have the c-gear on when doing this! it messes up your perimeter search.
7.) sweet scent and catch and find iv's
8.) plug in all results in the reporter search and you got your one timer ^_^

hope that is more clearer for you...
 
Thanks that is a lot clearer, quick question though should I use the fake GTS that I heard about to find IV's or just use the one in RNG Reporter
imo yes pokecheck is way much better to use for iv checking then calculators but its still find if you use the calculators...its up to you what you want to do and glad to help ^_^ if you need anything else let me know...
 

Cereza

Tastes Like Candy
in gen 5 the only ways to find your SID is sending one of yours pokemon to pokecheck or using an AR/cheating device. The L/R is to prevent the reporter from giving you seed that require pressing said buttons as they tend to break rather easily.
 
hi to all, i'm skagno and i need a little explanation how abusing pokemon radar with method described here http://www.smogon.com/forums/group.php?do=discuss&group=&discussionid=32004
i try to rng a slot 2 pokemon, but i don't understand this Advances to hit IV frame = ( ( Target frame – 8 ) / 2 ). Because this is slot 2 pokemon i need to choose odd fram like 29. the result of formula is 10.5 . The result must be 10 or 11? Second. spinning of key system is correct but i don't center iv frame. In waiting of response at this question i tell you all thanks . Sorry for my bad english but i'm italian ;)
Hey, because you are going for a slot 2 pokemon, there are an additional 13 advances (due to the first pokemon) and so to hit frame 29, the formula would actually be: ( (29 - 8) - (13*slots before target) ) / 2. This results in 4 spinner activations required.
 
We need some help with the Chatot comfirmation.



We are aiming for Frame 69. In theory, once I hear Low (8) we must be at Frame 69, right? In practice, whenever we hear Low (8), we get an egg with an Adamant non-shiny Pokemon. We did it three times until I decide to get my egg after hearing the Mid-Low (23) of the Frame 67.

Can someone explain why exactly the Chatot confirmation was always one off? I think my hearing was just fine, because it was constant four times.
 
We need some help with the Chatot comfirmation.



We are aiming for Frame 69. In theory, once I hear Low (8) we must be at Frame 69, right? In practice, whenever we hear Low (8), we get an egg with an Adamant non-shiny Pokemon. We did it three times until I decide to get my egg after hearing the Mid-Low (23) of the Frame 67.

Can someone explain why exactly the Chatot confirmation was always one off? I think my hearing was just fine, because it was constant four times.

Formula for # chatot pitches = target frame - initial frame (at least for gen 5. in gen 4, you have offsets based on the roamers...)

so if your initial frame was say 65 and your target frame 69, you would do 69-65 = 4 pitches starting from 65: 65, 66, 67, 68.

edit: if you're breeding in bw1, you need to account for wandering NPCs when you do your chatot pitches. sometimes you'll have to stop 2 frames before the target, sometimes 1. it really just comes down to consistency
 
We want to determine the frame just by hearing, because we are in an area with moving NPC (necessary for breeding). In theroy, when we hear Low (8), we must assume we are moving to 69, correct? In that case, whenever we receive an egg, it turns out non-shiny Adamant.
The only explenation I can think of is that when you accept the egg, the Frame is advanced by 1 before you actually receive the egg. We'd like to hear it from someone, who can confirm this.

Edit: Fair enough, I just wanted to know what might have caused that one advancement. Either way it probably would not have change anything, thanks.
 
We want to determine the frame just by hearing, because we are in an area with moving NPC (necessary for breeding). In theroy, when we hear Low (8), we must assume we are moving to 69, correct? In that case, whenever we receive an egg, it turns out non-shiny Adamant.
The only explenation I can think of is that when you accept the egg, the Frame is advanced by 1 before you actually receive the egg. We'd like to hear it from someone, who can confirm this.
I've had this happen many times, where I go over my target frame by one. It's because there are wandering NPCs in the area near the daycare that advance your PIDRNG frame.

If you're observing that you hit frame 70 when you stop at Frame 68 - Low(8), then you should adjust by stopping instead at Frame 67 - Mid Low (23). Again you just have to be consistent in your timing when you exit the menu and talk to the daycare man.
 
Quick question about Lati@s, haven't attempted to catch him but I did see him in the dreamyard and turned off my game. According to http://www.serebii.net/black2white2/legendary.shtml, "You need to follow them and try to intercept". I'm wondering if I have to do the RNG-soft-resetting right when i walk into the dreamyard or will Lati@s pause somewhere else and I'd catch like any other stationary-legendary pokemon?
you follow latios for a few times until you're forced to battle him on a narrow ledge all the way to the east. you're forced to take one extra step to trigger the event, but you can save before you take that step. Also there's a youngster wandering about in the dreamyard that can randomly advance your PID frame. battle him first (to stop his movements), save, then seek out latios on the ledge.
 
I'm just asking for a general help the guide really confused me anyway here are my results

Actual Seconds, Vcount, Timer0, GxStat, Vframe, Seed

21, 60, C7E, 6, 6, D24FCE60A6B0D86C
21, 50, C7B, 6, D, CAB4DE8E07791FF7
21, 60, C7F, 6, 6, AF4AC3AA78297C6C
21, 60, C7E, 6, 6, ED58737F99882E09
21, 60, C7F, 6, 6, D7E8C3E9D2774F58
21, 60, C7F, 6, 6, 03D1688572B13DA4
21, 60, C7F, 6, 6, D9BEA2C4D69E519E
21, 60, C7F, 6, 6, 2935DB10C50D1901
21, 60, C7E, 6, 6, D81E3530E7A8E5F4
21, 60, C7F, 6, 6, 17C01243933FDEE0
21, 60, C7F, 6, 6, 993289C02D471CA0

My second trial gave me two options so I kept it in, but another looked very similar to the others.
If this is for White 1, then those results make perfect sense. Your most common Timer0 is C7F, and you will hit C7E occasionally. The second result is a fluke, all that means is that the IV range you input was wide enough to create two possible results.
 
If this is for White 1, then those results make perfect sense. Your most common Timer0 is C7F, and you will hit C7E occasionally. The second result is a fluke, all that means is that the IV range you input was wide enough to create two possible results.
thats what i was trying to tell him but he keep getting confused what im saying XD so i told him the steps so he understands the process...anyway i figured out that i have to search my perimeters 10 times and choose the best timer that hits the most for bw2...wow thats so crazy the timer is so jumpy :/ well wish me luck gunna try like crazy to hit something...thanks for the trying to help...
 
okay now i got like 10 results...

i noticed that i found 4 the same timer but the thing is that i get different natures that are caught when setting my perimeters...is this normal?i know there is moving npc as well in black and white 2..is it maybe moving npc's that making the natures jump? im doing it for black and white 2...just wondering...i want to make sure that im positive i got the right timer...
 
Yes, randomly wandering NPC may occasionally advance the PID frame, which determines the gender, the shinyness and, of course, the natures. In most cases it is recommended to do the actual RNG abuse in areas without randomly moving NPC so you can advance your PID frame controlled via Chatot.
 
In my pokemon black (1) I can´t catch any solosis and unfortunatly I dont have any access to wifi connection in order to get one from the GTS. But I seriously want a non-hacked solosis. My idea was to create one via action replay and send it into daycare with a normal ditto. I did this and to my surprise, i could hatch a solosis (I thought AR Pokemon couldnt breed any Pokemon at all). So my question:
Will the bred pokemon be treaten as non-cheat pokemon and can I use it for standard breeding (BW)? Will any seed I find on RNG-reporter work on this bred solosis or do these seeds don´t work at any AR product at all? Does anybody have experience with it?
 
As long as your parents have legal IV and moves the offspring will be fine. Breeding RNG works the same with them, why don't you just find yourself a Solosis via RNG when you are experienced with that? Just limit the encounter slots to those who give you Solosis.
 
Wow, thanks Onicon, that´s very good news for me! Now I can breed all the pokemon I normally could´t find in my version!
About finding a solosis via limiting the encounter slots: This won´t work since in Pokemon black, you can´t catch solosis at all.
Another question: Is there any way how to find out if a pokemon is hacked or not (except of checking obvious criteria such as pokeball it was caught in, illegal move combos, abilities...)? how can i do this (preferably checking with an AR)? Somebody traded me a magnezone but im not sure if it´s legit.