Im sorry I'm a little lost. Why is everything adding up to 90 seconds for you?Well, it's unlikely 60 will work for the first timer... The first timer plus the second timer has to add up to the seconds you want to hit. So, random example, say I want delay 2010 at 22:48:30. Put 2010 in the box, and that gives a wait of 33.5. Assuming I'm starting with the calibration set to 0 (is 4.5 the default?), I need to have a first timer that's long enough for me to reset, and adds to 33.5 to make the 30 seconds I'm aiming for; so, if I have a first timer of 56.5, that gives me long enough to reset, and I need to set my DS clock to 1 minute ahead (i.e. 22:47) to end up on 22:48:30 exactly as the second timer finishes. Then to calibrate; say I'm hitting a delay of 1998 pretty consistently. So, my delay is 12 too low. I add 12 to the target delay in the box to give 2022. My wait changes to 33.7 seconds. So I adjust the first timer to 56.3 to make up the difference.
Also can anyone explain to me what 1 calibration down means? I went from -95 to -32 after I first calibrated.