ok i did check twice if my flashcard parameters are usable, and it is, so ill try to find the parameters now^@NiGHtsBeta09:Read the 3rd post in this thread. It explains how to get rid of weather.
You're using a flashcard. That's why you're getting no help. Flashcards don't all have usable parameters and the process of finding flashcard parameters is much more tedious. You're going to have to use some common sense to guide yourself.
You ask "what's the min/max of parameters?" The search range is different depending on your flashcard/firmware and I don't think there's been much (or any?) research on flashcards. You're going to have to search very large ranges for each parameter until you find a result. Then you'll have to test that result by a) using a different time; see if you get the same parameters again b) try RNGing with those parameters.
Note that RNG reporter allows 0-FFFF for each parameter. I'm not sure if each parameter can take on any value between 0-FFFF (doubt it 'cause I've never seen GxStat other than 6 or 86 and I don't think I've seen VFrames higher than 3F either. I think VCount tends to be 60 or lower and timer0 is pretty much anything. Those searches could take hours if your computer is slow. I'd say this is a decent starting point and you can expand it from there if you get no results.
Before you do that try to start your game at the same time several times and see if you can get the same Pokemon (IVs, nature, everything) each time. If you get the same Pokemon each time it means your flashcard has usable parameters.
Don't calibrate 50 times! If you do it right you will only need to calibrate 2 times. 1 to find your parameters, second to verify. After that you only need to play around with the parameter finder until you find your parameters and can verify they are correct.
im turning my pokemon game at 09:00:20 with these parameters:
seconds:20/30
Vcount:0/60
timer0:b00/dff
GxStat:6/86
Vframe:0/1f
Am I doing this right?oh almost forgot the IV from the femeale durant:9/0/22/13/22/21