-
Welcome to Smogon! Take a moment to read the Introduction to Smogon for a run-down on everything Smogon, and make sure you take some time to read the global rules.
Instacheck Hotspot -- a fast Pokémon checker for XY
- Thread starter ΩDonut
- Start date
- Status
To almost fully replicate the comfort of RNG abuse shortly after only a month in this brave new world. I am truly impressed.
Probably needless to mention, i have to line in with those requesting help from others. As my specific issue doesn't seem to be mentioned around other common gathering spots for this topic, i am trying to put my question here. Desired result is me successfully connecting to the virtual hotspot from the game and monitor data from the Pokémon/Eggs i offer for trade, for those that may attempt to deconstruct my request.
I already managed to successfully install Instacheck, have connected my notebook PC through an ethernet cable while writing, the regular Wi-Fi connection disabled and enabled internet connection from external devices for the LAN connection as well as the virtual hotspot. The virtual hotspot is accessed by the 3DS, but the attempt to connect to the internet fails every time.
Oddly enough, i was able to connect to the internet within the connection test earlier today. However, access to the Internet within the game itself was not possible. The Wi-Fi connection to the router was also active at that time and the default search engine accused me of sending undesired queries.
Many thanks in advance,
Impergator
Notice: This is a repost from #95, due to being apparently overlooked in the surge of requests. If this should be not allowed, even if i found no explicit mention in the first post, please delete this post and inform me!
Probably needless to mention, i have to line in with those requesting help from others. As my specific issue doesn't seem to be mentioned around other common gathering spots for this topic, i am trying to put my question here. Desired result is me successfully connecting to the virtual hotspot from the game and monitor data from the Pokémon/Eggs i offer for trade, for those that may attempt to deconstruct my request.
I already managed to successfully install Instacheck, have connected my notebook PC through an ethernet cable while writing, the regular Wi-Fi connection disabled and enabled internet connection from external devices for the LAN connection as well as the virtual hotspot. The virtual hotspot is accessed by the 3DS, but the attempt to connect to the internet fails every time.
Oddly enough, i was able to connect to the internet within the connection test earlier today. However, access to the Internet within the game itself was not possible. The Wi-Fi connection to the router was also active at that time and the default search engine accused me of sending undesired queries.
Many thanks in advance,
Impergator
Notice: This is a repost from #95, due to being apparently overlooked in the surge of requests. If this should be not allowed, even if i found no explicit mention in the first post, please delete this post and inform me!
The method or operation is not implemented.
is an error i'm getting?
has anyone ran into this and found a way to fix it?
is an error i'm getting?
has anyone ran into this and found a way to fix it?
Do any of your connections look like this where it says you are connected via Ethernet and Wireless to the same network? That is how I was able to get it to work.
Yup. I'm using Windows 7 64 bit.
Try changing the shared connection in the window that opens when your first start Instacheck.
K so I created this account to try to fix my problem, hopefully someone will be able to help me.
Ive downloaded everything, and got the instacheck hotspot going. but now im at the point where im trying to get my 3ds to connect to the interenet. and it says it could not connect. with an error code of 003-1101.
Any idea whats wrong and how to fix it?
Ive downloaded everything, and got the instacheck hotspot going. but now im at the point where im trying to get my 3ds to connect to the interenet. and it says it could not connect. with an error code of 003-1101.
Any idea whats wrong and how to fix it?
Do any of your connections look like this where it says you are connected via Ethernet and Wireless to the same network? That is how I was able to get it to work.
Yeah. It does. I'm using the Local Area Connection as the Shared Network and the Wireless Network as the other network. Unfortunately, the DS isn't connecting to the internet still on the test. I don't think the DS is the problem as my phone also fails to connect to the internet when using the instacheck network.
I am having the exact same problem as Impergator and paipr. The network appears to be running correctly. I have allowed hosted networks through the command prompt. I've tried starting it through my wired connect and wireless... Any other ideas?
ooops double post :( im so sorry
Hey guys - just run into a lil bit of a pickle. I'm trying to set up Instacheck, and it's giving me some... Problems. I'm using a laptop, but connecting via ethernet, not connected wirelessly, but I can do if need be. I've installed winpcap, so that's not an issue. I keep getting the "The group or resource" error. I don't know why though, 'cos no traffic is coming in wirelessly - connected via cable.
This is my current setup.
This is the error.
Any ideas?
This is my current setup.
This is the error.
Any ideas?
Try restarting your computer and / or restarting Instacheck.
Same i can't connect to the internet aswell but i can connect to the Access Point and i already restarted my pc and instacheck.
tried this cause i may have gotten this on my first attempt, but when i type ncpa.cpl nothing opens up.
wait no got it, and it shows the option to disable, so im assuming that its enabled....still no luck connecting via my 3ds
It's ncap.cpl - looks like a typo.
Also, my wireless card (with the latest drivers) sadly don't support the Windows virtual adapter, if that's what you're referring to?
EDIT: Mistake in wording. It doesn't support Hosted Network Mode. I ran the netsh wlan show drivers command in cmd.
Got a question so I have everything downloaded and when I try to open instacheck it says "virtual router has stopped working" so I went to cmd and typed the WLAN show driver and mine doesn't even have the spot for hosted network is it just not compatible at all?
Thanks! I guess I'll throw the money at an ASUS wireless adapter. Seems like a better solution than dragging my work laptop home every time I want to use this.
Try to enable it in CMD with 'netsh wlan set hostednetwork mode=allow' and tell me what error you get
yeah i got to that part now, and it shows the option to disable, so im assuming its enabled. still cant get the 3ds to connect to that instacheck hotspot.
[quote="Pokemon Breeder Sophie, post: 4984797,
This program runs off a virtual adapter, so if your network card can't support it, then you might not be able to do this. How do you know your network card can't support it? that just seems odd to me, you may have to just enable it in the cmd prompt
Update: My issue is resolved, just reset my computer and now its working somehow -__- lol[/quote]
Oh - so it's not a typo? My mistake! Also, see the cmd below for why I know I can't use a virtual adapter. It IS the miniport adapter you're referring to, yeah? The virtual one?
This program runs off a virtual adapter, so if your network card can't support it, then you might not be able to do this. How do you know your network card can't support it? that just seems odd to me, you may have to just enable it in the cmd prompt
Update: My issue is resolved, just reset my computer and now its working somehow -__- lol[/quote]
Oh - so it's not a typo? My mistake! Also, see the cmd below for why I know I can't use a virtual adapter. It IS the miniport adapter you're referring to, yeah? The virtual one?
I had the same issue and restarted my computer and now it works. But I noticed I had to re-enable hosted networks in CMD when I turned it back on...
does no one know how to fix the issue The method or operation is not implemented.
Oh - so it's not a typo? My mistake! Also, see the cmd below for why I know I can't use a virtual adapter. It IS the miniport adapter you're referring to, yeah? The virtual one?
[/quote]
Yikes thats a bad sign lol Have you tried using the command 'netsh wlan set hostednetwork mode=allow' in CMD? Do you just get an error? :( Oh well network cards are cheap.
- Status