Here is a version updated with Ramnarok and Shox prevo, as well as WCAP stats.
https://docs.google.com/spreadsheets/d/1YZCB5SSuC2-eYXDywfWRw0Cz_6Yc5Z7vGD8LdBszvss/edit?usp=sharing
Noob's guide to BSR
One might look at the BSR sheet and be very confused as to what's happening. I'll provide a rundown here, summarizing this thread:
https://www.smogon.com/forums/threads/change-to-bsr-calculations.3671584/. The goal is to provide some insight on these values, so people can have some intuition beyond plugging values into the sheet and seeing what comes out. After reading the thread, I think the design of BSR is pretty cool, so I figured I wanted to share.
BSR is a measure of power for a Pokemon's stats that aims to circumvent some issues with BST. On the defensive side, it aims to equalize high-HP, low Defense spreads with low-HP, high Defense spreads that have similar overall bulk. On the offensive side, it aims to account for speed dynamics and account for mixed attacker dynamics, reducing the penalty for having points in the non-attacking offensive stat.
Calibration
One useful feature of BSR is that it is calibrated to BST (roughly). This means that the average and standard deviation of all Pokemon's BSR is equal to the average and standard deviation of all Pokemon's BST. This means that, for Pokemon who are relatively unaffected by BSR adjustments (average speed, balanced HP/Defenses, no major disparity between attacking stats), BSR and BST will be very similar. An example of this is Charizard, who has a BST of 534 and a BSR of 533.46.
From here, I will discuss raw BSR (and the associated ) unless I am talking about interpretation of the values. This just makes it simpler, but the calibration process is simply:
BSR = (rBSR - mean(rBSR))* 120 / sd(rBSR) + 420
420 is slightly lower than the actual average BST (430.0) and 120 is slightly higher than the actual standard deviation (108.8) but it is close enough...
The BSR formula is PT + ST + 2 * S, where PT, ST, are Physical and Special Tankiness respectively, and S is Sweepiness. Sweepiness is a complicated formula that depends on PS and SS, Physical and Special Sweepiness respectively. I will cover this after the 4 values that we are all familiar with in stat limits.
PT and ST
The formula for PT is (HP*2 + 141) * (Def*2 + 36). This is the product of HP and Defense of a Pokemon at Level 100 with these base stats, with neutral nature, 31 IVs, and 0 EVs. This is a pretty intuitive measure of bulk.
eg. For a Pokemon with 100/100 bulk (like Mew), raw PT is (100 * 2 + 141) * (100 * 2 + 36) = 341 * 236. If you look in the teambuilder, these are the stats Mew has with no EV investment.
One thing to note is that PT does not measure the effect of EVs on bulk. This means certain spreads can gain much more bulk from EVs than others, even if they share the same PT. Consider Chuggalong (45/117, 90.86 PT) vs Iron Valiant (74/90, 90.94 PT). Uninvested, both Pokemon take roughly the same damage from Physical attacks, but HP investment does more for Chuggalong than Iron Valiant.
Calcs
0 Atk Gliscor Facade (140 BP) vs. 0 HP / 0 Def Chuggalong: 85-100 (36.7 - 43.2%) -- guaranteed 3HKO
0 Atk Gliscor Facade (140 BP) vs. 0 HP / 0 Def Iron Valiant: 106-125 (36.6 - 43.2%) -- guaranteed 3HKO
0 Atk Gliscor Facade (140 BP) vs. 252 HP / 0 Def Iron Valiant: 106-125 (30.1 - 35.5%) -- 29.2% chance to 3HKO
0 Atk Gliscor Facade (140 BP) vs. 252 HP / 0 Def Chuggalong: 85-100 (28.9 - 34%) -- 2.1% chance to 3HKO
Above all applies to ST, but replace Def with SpD.
PT and ST are calibrated to mean 75 and sd 30. This means an average Pokemon has PT of 75 (a bit higher than Syclant), top 16% has a PT of 105 (about Colossoil), and top 2% has PT of around 135 (about Pyroak).
You can consider PT to be about the Def of a Pokemon with average (70-75) HP. For example, Tactite (70.65) has 67.7 PT, and Iron Valiant (74/90) has 90.94 PT.
PT and ST are relatively straightforward so this section is short.
Before I explain PS and SS, I will need to explain SF and T. These are important values
SF and T
SF is "speed factor". This measures the proportion of Pokemon that a given Speed stat outspeeds. The rationale is that Speed is only valuable when it allows us to outspeed something, so Speed that does not allow us to outspeed any additional Pokemon is not useful (not necessarily true). This aspect of SF was very apparent during Ramnarok's process, where speeds between 151 and 179 gave the same PS/SS values despite relevant breakpoints (+1 Gholdengo, +1 Great Tusk, Modest outspeeding Timid Pult, etc.).
There is a caveat, which is that Pokemon which we speed-tie with count as half in SF calculations. This can be seen where the SF of 5 Speed is 0.061%, while the SF of 6 Speed is 0.121%. This means we outspeed Munchlax half the time at 5 Speed and all the time at 6 Speed, which makes sense given how speed ties work.
T is "turns to kill". There is a complicated formula for this, but it is usually just set by Stats Leader. The idea behind T is that Speed is not always relevant, if both Pokemon deal damage to each other without knocking each other out. For example, if 2 Blisseys are hitting each other with Pound, both take some damage regardless of who goes first, so speed doesn't matter. Thus, we mainly care about speed on the turn where it decides life or death.
The impact of these values is explained in the following section
PS and SS
PS and SS are more complicated. The formula for PS is (Atk*2 + 36) * (SF + T) / (1 - SF + T).
(Atk*2 + 36) is the Attack value of a Pokemon at Lv100 with neutral nature, 31IVs, and 0EVs.
SF / (1 - SF) is a function that provides increasing penalties the closer SF is to 1 (outspeeds the whole metagame), and increasing benefits the closer SF is to 0. If SF is 0, this term goes to 0, and likewise if SF is 1, this term goes to infinity. The tipping point is when SF = 0.5, which is the median Speed of Pokemon (66).
Adding T to the numerator and denominator dampens this effect. This makes sense, as Speed is considered important only in the life-or-death situations, and T measures how often those turns arise. In the following graph, we can see how T = 1 (red), 1.5 (green), 2 (purple), and 3 (black) affect the SF to PS curve:
Thus, low T values allow more Attack for slow spreads and penalize fast spreads more, while high T values reduce the effect of Speed on PS.
Above all applies to SS, but replace Atk with SpA.
Like PT and ST, these values are calibrated to mean 75 and sd 30. An average Pokemon has 75 PS (Skarmory, Mienfoo... lol), top 16% of Pokemon have at least 105 PS (Flamigo, Fezandipiti), and top 2% of Pokemon have at least 135 PS (Zarude, Lycanroc).
Oddly, PS and SS roughly match when Speed is 85 (SF = 71). For example, Duraludon has 95/120/85 with 98.43 PS, 122.89 SS and Rillaboom has 125/60/85 with 122.82 PS, 74.23 SS (???). Faster Pokemon will have higher PS than their Attack stat eg. Deoxys-S (95/180 123.3 PS) while slower Pokemon will have lower PS than their Attack stat eg. Kingambit (135/50, 94.37 PS).
S and mixed attackers
One of the big goals of the BSR revamp was to allow reasonable dump stats (off-Attacking stat) to not affect BSR. This was accomplished using a new term, S (sweepiness) that aggregates PS and SS.
The formula for S is (Magic Term) * (SF + T) / (1 - SF + T).
S is similar to PS and SS, but replaces (Attack * 2 + 36) with a magic term, which is the maximum of the following:
- (Atk*2 + 36) / mean(PT)
- (SpA*2 + 36) / mean(ST)
- geomean((Atk*2 + 36), (SpA*2 + 36)) / mean(min(PT,ST))
The first term is for physical attackers. It is the Attack value divided by the average Physical tankiness of all Pokemon.
The second term is for special attackers. It is the Special Attack value divided by the average Special tankiness of all Pokemon.
The third term is for mixed attackers. Geometric mean is an averaging method that penalizes large disparities between the 2 values. This is divided by the average of the lower of PT and ST for each Pokemon.
The rationale is that mixed attackers gain value by targeting the weaker defense of Pokemon. Thus, their offensive potential should be judged with this in mind.
The major benefit of this formula is that if a Pokemon is classified as a Physical attacker, its SpA stat does not factor into BSR at all (and likewise for Special attackers).
One can see which term is the largest for their stat spread by toggling offense ratings from "PS+SS" to "S only" in the BSR calculator. In the column labeled OCAT (Offensive category), it will say PHYS, SPEC, or MIXED, corresponding to which term is used for S calculations.
Interestingly, a Pokemon with 100 Atk needs 78 SpA to be classified as mixed, while a Pokemon with 100 SpA needs 80 Atk to be classified as mixed. I suppose this means that Pokemon with uneven defense distributions lean Physical.
The calibration is the same as for SS and PS, using mean 75 and sd 30.
Hopefully this helps people understand how BSR works better, so we can have more fun and informed discussion during Stats Limits.
TL DR:
Read the whole thing, nerd.