Curious about what we're currently doing about bots? Check out the latest updates from staff in this thread.
Welcome to Smogon! Take a moment to read the Introduction to Smogon for a run-down on everything Smogon, and make sure you take some time to read the global rules.
It's been quite long since I posted my Base Stats Ratings thread that would change the way we think about Base Stats. I thought to update the formulae a bit to reflect the new Pokemon being added in Platinum, and also, while I'm here, to make the ratings a bit better.
Firstly, a new Speed Factor chart:
Code:
Base Speed Speed Factor
-------------------------
1 to 5 0
6 to 10 2
11 to 15 4
16 to 20 11
21 to 23 19
24 to 25 22
26 to 28 30
29 to 30 31
31 54
32 56
33 58
34 60
35 61
36 79
37 to 39 84
40 85
41 111
42 113
43 115
44 to 45 118
46 139
47 140
48 141
49 to 50 144
51 179
52 181
53 to 55 183
56 203
57 to 58 206
59 to 60 210
61 239
62 to 63 241
64 to 65 242
66 268
67 270
68 273
69 to 70 275
71 305
72 308
73 to 74 309
75 310
76 318
77 320
78 321
79 to 80 323
81 348
82 351
83 352
84 354
85 355
86 381
87 386
88 to 90 387
91 411
92 to 93 416
94 to 95 417
96 to 97 438
98 to 100 440
101 to 102 463
103 to 105 464
106 to 108 471
109 to 110 472
111 to 112 480
113 to 115 481
116 to 120 488
121 to 125 492
126 to 127 495
128 to 130 496
131 to 140 500
141 to 150 501
151 to 160 503
161 to 180 504
181 to 255 505
This is simply the amount of Pokemon you'll outspeed with your Base Speed.
We now convert each Base Stat as follows:
Code:
Statistical HP = Base HP * 2 + 141
Statistical Atk = Base Atk * 2 + 36
Statistical Def = Base Def * 2 + 36
Statistical SpA = Base SpA * 2 + 36
Statistical SpD = Base SpD * 2 + 36
Statistical Spe = Base Spe Speed Factor / 505
We'll call the above SHP, SAtk, SDef, SSpA, SSpD and SSpe respectively.
Now we find the raw physical tankiness (RPT), special tankiness (RST), physical sweepiness (RPS) and special sweepiness (RSS):
Now we convert each of these raw statistics so that their individual mean is exactly 100 and their individual standard deviation is exactly 50. These become the physical tankiness (PT), special tankiness (ST), physical sweepiness (PS) and special sweepiness (SS):
Having equipped ourselves with the usual four main statistics for tankiness and sweepiness, we can now proceed to find the Offense/Defense Bias (ODB) and Physical/Special Bias (PSB). In passing, we also convert them to stats whose mean is exactly 0 and whose standard deviation is exactly 10:
Finally, we can find the overall rating of the Pokemon. Since we have ensured that the individual stats each have the same mean and standard deviation, this is now much more easy to find than in the first BSR version. We also convert the final answer so that the overall rating has a mean of 200 and a standard deviation of 100:
Code:
Rating = (PT + ST + PS + SS) / 1.525794 - 62.1586
Now let's provide a few charts that explain the number provided by each stat. This is now extremely easy to do since we have converted our stats to have meaningful means and standard deviations.
For PT, ST, PS and SS, we have (assuming they are rounded to the nearest whole number):
Code:
If PT/ST/PS/SS is Stat is Examples
------------------------------------------------------------------------------------------------
Less than 25 Horrible Ralts (PT), Magikarp (ST), Shuckle (PS), <none> (SS)
25 to 49 Bad Shuppet (PT), Pikachu (ST), Smeargle (PS), Wooper (SS)
50 to 74 Poor Alakazam (PT), Swellow (ST), Probopass (PS), Bastiodon (SS)
75 to 99 Below Average Gengar (PT), Breloom (ST), Spiritomb (PS), Slowbro (SS)
100 to 124 Above Average Ludicolo (PT), Mamoswine (ST), Hariyama (PS), Tyranitar (SS)
125 to 149 Good Machamp (PT), Roserade (ST), Kingdra (PS), Flygon (SS)
150 to 174 Very Good Magnezone (PT), Heatran (ST), Metagross (PS), Rotom-A (SS)
175 to 199 Excellent Gliscor (PT), Vaporeon (ST), Heracross (PS), Charizard (SS)
200 to 224 Fantastic Tangrowth (PT), Milotic (ST), Electivire (PS), Porygon-Z (SS)
More than 224 Amazing Steelix (PT), Snorlax (ST), Weavile (PS), Espeon (SS)
For ODB, we have:
Code:
If ODB is Pokemon is Examples
-------------------------------------------------------------------------
Less than -20 Absolutely biased towards defense Blissey, Aggron
-20 to -15 Heavily biased towards defense Hippowdon, Slowking
-15 to -10 Biased towards defense Skarmory, Hypno
-10 to -5 Moderately biased towards defense Walrein, Miltank
-5 to 0 Slightly biased towards defense Ampharos, Metagross
0 to 5 Slightly biased towards offense Gyarados, Dragonite
5 to 10 Moderately biased towards offense Mismagius, Magmortar
10 to 15 Biased towards offense Zapdos, Staraptor
15 to 20 Heavily biased towards offense Manectric, Salamence
More than 20 Absolutely biased towards offense Azelf, Alakazam
For PSB, we have:
Code:
If PSB is Pokemon is Examples
--------------------------------------------------------------------------
Less than -20 Absolutely biased towards special Regice, Gardevoir
-20 to -15 Heavily biased towards special Latias, Togekiss
-15 to -10 Biased towards special Porygon-Z, Houndoom
-10 to -5 Moderately biased towards special Rotom-A, Empoleon
-5 to 0 Slightly biased towards special Yanmega, Abomasnow
0 to 5 Slightly biased towards physical Swampert, Electivire
5 to 10 Moderately biased towards physical Weezing, Machamp
10 to 15 Biased towards physical Aerodactyl, Heracross
15 to 20 Heavily biased towards physical Mamoswine, Forretress
More than 20 Absolutely biased towards physical Rhyperior, Cloyster
Finally, for overall Rating, we have (assuming Rating is rounded to the nearest whole number):
Code:
If Rating is Rating is Examples
-----------------------------------------------------
Less than 50 Horrible Pichu, Feebas
50 to 99 Bad Smeargle, Ditto
100 to 149 Poor Delibird, Farfetch'd
150 to 199 Below Average Beedrill, Sunflora
200 to 249 Above Average Spiritomb, Shuckle
250 to 299 Good Scizor, Gliscor
300 to 349 Very Good Infernape, Umbreon
350 to 399 Excellent Entei, Jirachi
400 to 449 Fantastic Garchomp, Deoxys
More than 449 Amazing Slaking, Regigigas
Example: Let's calculate the Base Stat Ratings for Shiftry.
Shiftry's Base Stats are:
HP: 90
Atk: 100
Def: 60
SpA: 90
SpD: 60
Spe: 80
We first find the Statistical stats:
SHP: 90*2+141 = 321
SAtk: 100*2+36 = 236
SDef: 60*2+36 = 156
SSpA: 90*2+36 = 216
SSpD: 60*2+36 = 156
SSpe: Base Speed is 80, which corresponds to a Speed Factor of 323. Hence SSpe = 323/505 = 0.6396.
Now we find the raw tankiness and sweepiness stats:
I'm considering making a proposal that we stop using ODB and PSB for setting the stat limits, and instead use the four Tankiness and Sweepiness ratings instead. I think ODB and PSB is good for comparing pokemon to each other, but when setting stat limits for making new pokemon, I think using the more specific stat ratings would probably be more appropriate. Of course, if I make such a proposal, there will be some other process-related changes that would accompany it.
I don't want to hijack this thread and turn it into a pseudo-PR thread. But, I think your presentation of the stat ratings formulae is helpful to set the stage for a discussion of how we use the stat ratings here in CAP.
On another note, I'd really like to get more stat ratings info on the website -- either the main Smogon website or the CAP website. I'd like to have a fully populated table with the PT, ST, PS, SS, ODB, PSB, and BSR for every pokemon. If we used the "Sortable" class for the table (for those of you familiar with the Smogon CSS), then we could sort the entire dex on any of the various stat ratings. I think that would make these stat ratings really "hit home" with casual readers. Most people do not intuitively understand the magnitude of the stat ratings numbers themselves, but they would intuitively understand if those ratings are mapped to a list of pokemon and presented in order.
I don't have time to work on it myself, so I'm just mentioning it as an idea for the future. Since the CAP project relies heavily on these stats, I think it makes sense for us to distribute lots of information about your stat ratings.
Thanks again for the work you put into this, X-Act!
Have you updated the calculator online to reflect the changes?
If so, getting the BSRs for every pokemon is just a matter of applying the formula to something like an Excel Spreadsheet. You could calculate all of them at once and then just copy in the data. There's already Pokedexes that are Excel based, all we'd need to do is get it into a presentable format.
Good work as always X-Act.
Actually, I particularly like the new Rating system in tiers of 50 points each. As a noted stat-whore, I basically abused the hell out of the latitude the oddball BSR numbers gave us.
I while ago I tweaked CardsOfTheHeart's Pokémon Resource to include the ratings. I haven't used it for a few months and so some things are out of date and unfinished but it's mostly there. Might make a new one later using the new formula.
These stats make me a happy person. I love the work you have done here since these kinds of metrics are beautiful and meaningful.
One question though, do you think there is a way to combine typing (also ability and movepool but those are far more complex) in the overall rating of pokemon?
First of all, I might not have been posting in the CAP forums much lately, but I hope this thread shows that I haven't forgotten about them. :)
I've already made an Excel sheet of this - in fact, that's from where I get the formulae. I've made an Excel Sheet just for all of you. You can download it here. You can sort the ratings however you like. EDIT: Now with CAP Pokemon as well!
I should be able to update the BSR applet this weekend.
The main difference between the new BSR and the old one is that all ratings are 'clean', in the sense that every rating has an exact mean and standard deviation, which makes it extremely easy to reason about how 'good' or 'bad' the Pokemon is with respect to other ones. This has interesting repercussions. For example, a Pokemon with 80 Base Atk and 80 Base SpA won't have the same Physical Sweepiness and Special Sweepiness now. Similarly, a Pokemon with 80 Base Def and 80 Base SpD won't have the same Physical Tankiness and Special Tankiness.
About combining typing, I think it is possible to be implemented in the future, yes. I'll think about it.
Well I made the spreadsheet anyway (hadn't seen X-Act's post until now)... it includes VLOOKUPs for the rating charts so I might aswell post it until X-Act decides to add them to his.
Base Stats Ratings applet now updated to version 2.0.
I'm checking out Colossoil's stats here. Notice that even though it has equal Def and SpD stats, its Physical Tankiness is slightly better than its Special Tankiness statistically (meaning 133/72 in Defense is slightly better than 133/72 in Special Defense statistically).
Now we convert each of these raw statistics so that their individual mean is exactly 100 and their individual standard deviation is exactly 50. These become the physical tankiness (PT), special tankiness (ST), physical sweepiness (PS) and special sweepiness (SS):
Sorry X-Act, could you explain this passage a bit more in depth? Especially the bolded part. I know what deviation is when we talk about Shoddy ratings, for example, but what is the meaning of this word in the context of Stat ratings? Does this mean you give more weight to how much a specific "tankiness" or "sweepiness" deviates from the medium values (i.e., assuming the medium PT is higher than the medium ST, giving a higher PT than ST to Pokémon like Mew or Jirachi with equal Def and SDef)? And what does "mean" mean (no pun intended)?
First of all, 'mean' here means 'average'. So I convert the numbers so that they have a mean, or an average, of 100. I do the same for ODB and PSB (so that they have an average of zero) and rating (so that it has an average of 200).
Next, standard deviation. The standard deviation of a set of data is a measure of how much the data is spread away from the mean, or average, value. According to Chebyshev's inequality, the probability that a number is more than k standard deviations away from the mean is at most 1/k^2. So, in our case, if we have a set of data that has a mean of 100 and a standard deviation of 50, it means that, for example, no more than 1/2^2 of the data lies outside the range from 100 - 2*50 and 100 + 2*50. This means that at least 75% of our data must necessarily be between 0 and 200. Another example is if we put k = sqrt(2): according to Chebyshev, no more than 1/sqrt(2)^2 of the data lies from 100 - 50*sqrt(2) and 100 + 50*sqrt(2). This means that at least 50% of our data must be between 29.289 and 170.711. Typically the percentages are much more than this, but Chebyshev tells us that that is the smallest percentage for ANY set of data.
Because of this, the standard deviation can be used to reason about a certain number, something which we couldn't do well before. For example, if a Pokemon has a physical tankiness of 200, this means that its physical tankiness is, at the very worst, among the top 25% of Pokemon. This is the reason why I then rated each stat by putting them in ranges of 25 (half the standard deviation) for PT, PS, ST and SS, in ranges of 50 (half the standard deviation) for the rating itself, and in ranges of 5 (half the standard deviation again) for the ODB and PSB.
In a nutshell, by converting the stats to ones that have a 'nice' mean and standard deviation, I could rate each stat easily without worrying if the ranges I impose are right. To be honest with you, the ranges I imposed for the old Base Stats Ratings were basically pulled out of my ass (especially the ones for the rating itself), with very little reasoning behind them. I hope that this second version is a massive improvement at least in this respect.
while i'm here, i'm going to take this opportunity to say that all serious stat spread submissions for the CAP revisions will require the four ratings (physical tankiness, special tankiness, physical sweepiness and special sweepiness) to be posted with them using the new formula. the revision project will hopefully be started later today...
Thanks for the explaination, X-Act. It is much clearer now - although the fact that despite my love for math I wasn't that good with statistics hampers me a little here^^ (You know, that Chebyshev's inequality you told about does not belong to standard high school math where I studied :-P)
Would your formula change depending on what Generation you were basing your statistics on? I'm doing a statistical analysis of base stats throughout the generations, and I was wondering whether your numbers would change due to things such as less Pokémon existing, IV changes, and the stat split.
the speed factor would be different, but i see no reason why anything else would change.
Because i.e. Gen I, instead of 505 Pokémon there would be 151... Okay that makes sense.
However, what about the stat split? Would you calculate it like (changes in bold, this example would be Gen I):
Converting Base Stats:
Code:
Statistical HP = Base HP * 2 + 141
Statistical Atk = Base Atk * 2 + 36
Statistical Def = Base Def * 2 + 36
[B]Statistical Spc = Base Spc * 2 + 36[/B]
Statistical Spe = Base Spe Speed Factor / [B]151[/B]
Now for physical tankiness (RPT), special tankiness (RST), physical sweepiness (RPS) and special sweepiness (RSS) (Statistical Spc will be called SSpc):
Then everything else would proceed as normal, correct? I want to make sure I'm getting this right before I start working on implementing it into my statistics.
Because i.e. Gen I, instead of 505 Pokémon there would be 151... Okay that makes sense.
However, what about the stat split? Would you calculate it like (changes in bold, this example would be Gen I):
Converting Base Stats:
Code:
Statistical HP = Base HP * 2 + 203
Statistical Atk = Base Atk * 2 + 98
Statistical Def = Base Def * 2 + 98
[B]Statistical Spc = Base Spc * 2 + 98[/B]
Statistical Spe = Base Spe Speed Factor / [B]151[/B]
Now for physical tankiness (RPT), special tankiness (RST), physical sweepiness (RPS) and special sweepiness (RSS) (Statistical Spc will be called SSpc):
Then everything else would proceed as normal, correct? I want to make sure I'm getting this right before I start working on implementing it into my statistics.
IVs in gen 1 provided 30 total points, instead of 31. So reduce them by 1. Also, add 63, as all Pokémon have max stats in Gen 1. Thus, add 62.
*EDIT* I hereby present the 5th gen speed factor chart. Code:
Base Speed Speed Factor
-------------------------
1 to 5 0
6 to 10 2
11 to 15 5
16 to 20 14
21 to 22 27
23 28
24 31
25 32
26 to 28 42
29 43
30 44
31 75
32 77
33 81
34 83
35 84
36 105
37 to 38 109
39 110
40 111
41 142
42 144
43 149
44 153
45 154
46 181
47 182
48 184
49 to 50 189
51 229
52 231
53 to 55 233
56 262
57 265
58 267
59 273
60 274
61 313
62 to 63 315
64 317
65 321
66 357
67 361
68 365
69 368
70 369
71 402
72 405
73 to 74 407
75 410
76 421
77 424
78 426
79 428
80 429
81 458
82 461
83 462
84 465
85 466
86 493
87 498
88 499
89 to 90 500
91 529
92 534
93 536
94 to 95 538
96 to 97 562
98 566
99 569
100 570
101 595
102 599
103 600
104 to 105 601
106 611
107 to 108 612
109 618
110 619
111 628
112 630
113 632
114 633
115 634
116 642
117 to 120 644
121 to 125 648
126 to 127 651
128 652
129 to 130 653
131 to 140 657
141 to 145 658
146 to 150 659
151 to 160 661
161 to 180 662
181 to 255 663
IVs in gen 1 provided 30 total points, instead of 31. So reduce them by 1. Also, add 63, as all Pokémon have max stats in Gen 1. Thus, add 62.
Thanks for the explanation.
However I've run into a snag, even by modifying the formula to reflect Gen 1, the means for PT, ST, PS, and SS aren't 100 (they're in the 140s) and the average for ODB isn't 0 (it's -6ish). I'm going to try to tinker around with the numbers in the formula but I'm sure this is out of my current math knowledge. Help would be appreciated, but since this isn't the right place to ask it I don't really expect any.
Anyway, thanks for the help guys. I'm one step closer to finishing my power creep analysis.