Page bump
-
Welcome to Smogon! Take a moment to read the Introduction to Smogon for a run-down on everything Smogon, and make sure you take some time to read the global rules.
Most Generation PRNG Help / Information
- Thread starter mingot
- Start date
I believe its female.
EDIT: You could make an educated guess by looking at the other gender ratios. 12.5 always means the gender of females (Starter) so that will most likely be male if its female the other percentages will always be female. Same thing goes with the 75% ratio if its male the rest will always be male. :P
For HGSS, you can try mine. There are links in the guide section of my thread to the forum guides for shiny eggs on DPPt, since this is already adequately covered.
Edit: Thanks, Frozen_Spirit. :-)
Um. Alright. That seems kind of confusing.
I notice it said do a calibration. But is it the same like how I RNG the standing Latias, which was my delay would be 3692 and I use the Pikatimer and put in min delay 490 and wanted delay 3692, calibrated seconds as 14 and wanted seconds as 50.
I notice it said do a calibration. But is it the same like how I RNG the standing Latias, which was my delay would be 3692 and I use the Pikatimer and put in min delay 490 and wanted delay 3692, calibrated seconds as 14 and wanted seconds as 50.
just a couple questions:
1. does it matter if i use either a DSi or a DS Lite when RNG abusing?
2. can someone with experience show me the ropes around RNG abusing? i've read the guides, but they're too advanced for me. i would be ever so grateful.
1. does it matter if i use either a DSi or a DS Lite when RNG abusing?
2. can someone with experience show me the ropes around RNG abusing? i've read the guides, but they're too advanced for me. i would be ever so grateful.
502 delay 14 seconds I got that relsult twice
Ok NPC might be my problem.. I'll do the calibration more just in case. I don't have the computer anymore (I'm posting off my iPod) so I'll try again as soon as possible (which might be till the weekend) and hopefully it will work.
Doing the calibration gives your delay and seconds. NPCs only advance frames, so those two aren't exactly linked. If you have roamers, it'd be easier to do.
On "Time Finder" max out the bottom box. In your min/max delay range, enter in 99. In your min/max seconds enter in 9. You should hit something in that region if you're using pikatimer.
On "Time Finder" max out the bottom box. In your min/max delay range, enter in 99. In your min/max seconds enter in 9. You should hit something in that region if you're using pikatimer.
Ok well after 2679 flips it didn't work :/ so Im trying a differant one. so how would I activate the regi while only advancing the frame by two?
here is the frame stuff
PID: 45f537b3 (IMPISH, ability 1) 31/31/29/7/31/15 (Seed: cc01029e Method 1: 9, J (synch): 4, J (no synch): None, K (synch): 4, K (no synch): None) HP DARK 67
here is the frame stuff
PID: 45f537b3 (IMPISH, ability 1) 31/31/29/7/31/15 (Seed: cc01029e Method 1: 9, J (synch): 4, J (no synch): None, K (synch): 4, K (no synch): None) HP DARK 67
Wait the delay affects the journal flips? Then if I use a 598 delay how many flips would I do for this?
PID: 45f537b3 (IMPISH, ability 1) 31/31/29/7/31/15 (Seed: cc01029e Method 1: 9, J (synch): 4, J (no synch): None, K (synch): 4, K (no synch): None) HP DARK 67
PID: 45f537b3 (IMPISH, ability 1) 31/31/29/7/31/15 (Seed: cc01029e Method 1: 9, J (synch): 4, J (no synch): None, K (synch): 4, K (no synch): None) HP DARK 67
I think I calibrated my SS well (With a SMW Game Pak in the GBA slot if it matters.) I've come up, after ten tries, 11.4 seconds and 492 delay. Should I round to floor or ceiling?
And after I hit and confirm my target time (With the Elm method), where do I go from there to catch my perfect IV Pokemon? (I will be using Check IV AR code for this.)
Seconds: 6 Delay: 491
Seconds: 7 Delay: 499
Seconds: 12 Delay: 485
Seconds: 12 Delay: 493
Seconds: 12 Delay: 487
Seconds: 13 Delay: 491
Seconds: 13 Delay: 499
Seconds: 13 Delay: 495
Seconds: 13 Delay: 491
Seconds: 13 Delay: 485
Seconds: 7 Delay: 499
Seconds: 12 Delay: 485
Seconds: 12 Delay: 493
Seconds: 12 Delay: 487
Seconds: 13 Delay: 491
Seconds: 13 Delay: 499
Seconds: 13 Delay: 495
Seconds: 13 Delay: 491
Seconds: 13 Delay: 485
And after I hit and confirm my target time (With the Elm method), where do I go from there to catch my perfect IV Pokemon? (I will be using Check IV AR code for this.)
You're not so much averaging as seeing what you hit the most, ie what you're most consistent at. From the looks of it, 13/12 takes the cake for seconds. Reason it's two and not one number is most likely because you're not totally consistent with mashing "a" to get to past the continue screen.
What you do next is dependent on whether or not you're using emloop or pikatimer. If pikatimer, you're fine since you'll be going for higher delays and possibly higher seconds anyways. With emloop, you really need to narrow your second values down to 1 number.
What you do next is dependent on whether or not you're using emloop or pikatimer. If pikatimer, you're fine since you'll be going for higher delays and possibly higher seconds anyways. With emloop, you really need to narrow your second values down to 1 number.