-
Welcome to Smogon! Take a moment to read the Introduction to Smogon for a run-down on everything Smogon, and make sure you take some time to read the global rules.
Most Generation PRNG Help / Information
- Thread starter mingot
- Start date
== means exactly equal
>= means greater than or equal to
<= means less than or equal to
!= means not equal to
The E and O may stand for even and odd.
The others may have something to do with hidden power, but I don't know how it works. These are the big ones though.
Edit: You may want to lower your qualifiers to get results. I've been getting good results using atk >= 30, hp,def,spDef,speed >= 25
>= means greater than or equal to
<= means less than or equal to
!= means not equal to
The E and O may stand for even and odd.
The others may have something to do with hidden power, but I don't know how it works. These are the big ones though.
Edit: You may want to lower your qualifiers to get results. I've been getting good results using atk >= 30, hp,def,spDef,speed >= 25
Ah good, I was on the right track (that's what I assumed they meant).
When looking for Adamant/Jolly/Bold natures, what do I fill in and not fill in? I can't to find any results every time I look through certain delays or frames, so I think I'm doing something wrong. I'm supposed to be looking under the "Time Finder" and "Capture" tab right?
When looking for Adamant/Jolly/Bold natures, what do I fill in and not fill in? I can't to find any results every time I look through certain delays or frames, so I think I'm doing something wrong. I'm supposed to be looking under the "Time Finder" and "Capture" tab right?
Don't put anything in for spAtk since you don't really care. Make sure you're on method K. If you're looking for a specific nature, use the nature drop down, if you have a syncher (as I suggest you do), use the respective drop down. You may want to consider removing one of your specifications. Sometimes I have to set HP to none.
Ah, well I've been following these exact steps aside from removing HP. I'll give that a try, as well as leaving SpA blank instead. And, it might be possible that most of what I'm looking for is not in the 600-700 delay range. I'd like to keep it within 150 frames.
Ah. I didn't realize you were keeping it in the 600-700 range. The last one I had was 1789. You're going to want to widen that.
I will increase the range, but I imagine it's going to be a long search (I'm going to see if I find a good Adamant/Jolly/Bold spread within 150 frames and somewhere in the 700-1800 delay range).
I'm going to start RNG'ing Entei, Raikou and Latios in SoulSilver. I read that RNG'ing them is different because they are Roamers and Roamers advance the frame randomly in HG/SS. Is there any kind of guide for RNG'ing these Pokemon and I would be more than pleased if someone could help me with these.
You probably don't need to have such high frames if you don't want it to take so long.
@Miku: Check the first page. If it's not there, I'm not sure. I haven't got around to doing those myself.
Well I was thinking of reducing the frames to around 90 to cut the time almost in half.
Are you softresetting when the clock hits zero? Because those seconds seem quite off.
Is your DS clock perfectly synched to the clock that you are resetting by? That's the only thing I can think of that would set you off. :\
Yeah, that would do it :) Try it again now, and see if your results are better.
Those are the gender ratios for non-50/50 gender ratio pokemon.
12.5 is 12.5% female / 87.5% male
25 is 25% female / 75% male
75 is 75% female / 25% male
No, no, no. I wasn't asking are they all correct. I'm simply asking what does each of the gender ratio go for?
The others told me the first gender ratio goes for wild pokemon.
And the second gender ratio goes for pokemon like Snorlax.
So my question is what does the other two gender ratios go for?
I'm asking because I'm trying to rng capture a wild bold (male) Wailord with Electric hp but the 3 seeds that I found only have a Female gender ratio for the pokemon in the wild.