Still didn't work got the same problem
-
Welcome to Smogon! Take a moment to read the Introduction to Smogon for a run-down on everything Smogon, and make sure you take some time to read the global rules.
Instacheck Hotspot -- a fast Pokémon checker for XY
- Thread starter ΩDonut
- Start date
- Status
Hey guys, i know some guys who have managed to get program working, without being connected with the Ethernet Cable. Is this possible? How would you explain something like that?
Has their Wi-Fi connection been spitted in two parts? One to connect PC>Internet and the other as the Hotspot? I really can't explain this.. Thank you for the answers :)
Has their Wi-Fi connection been spitted in two parts? One to connect PC>Internet and the other as the Hotspot? I really can't explain this.. Thank you for the answers :)
I dont use an ethernet cable, and i can run it fine. Where it says 'shared connection' i just shoose wireless network connection and im good. I dont have an ethernet cable, to far away from the modem :)
Thank you for your quick answer :) Now I've got to try that :)
Anyone know what could be wrong the program comes up and all but it won't give me an adapter to choose and they should be enabled correctly
Last night was a weird night though, I finally got it working, got a trade up and found a couple of egg values I was saving, and stopped the trade and then got disconnected. Other friends were having the same problem too with normal wifi cuz the servers were being maintenanced. Yea, if every step has been followed in the earlier guide, Jarieスイクン did post an alternate guide with the newer version of Instacheck
Let's do it. I have Instacheck on and need to check eggs myself.
I am going to check some eggs too. Is anyone online?
I can't get this to work for me :/ I'm getting the same blank box in my Instacheck even though it's clearly connected. I went through everything I saw in here but nothing worked. Could someone please tell me my shiny value too?
still want to check?
TsukiMegami:
I can't say for sure, as I don't know the inner workings of it all, but I'd suggest this: Try it with all your extra wifi stuff off (no uTorrent, firefox, messengers, etc.), just have the 3DS going through it. I base the suggestion on the way it's worded; it sounds like it's trying to pick it out from too much data.
deviruchi: ...yes. You have to have at least one unconnected wireless adapter (in addition to your wired/less one that provides you internet).
Also, simply that it can detect wifi doesn't mean anything helpful, since if it's not wifi-capable, it'd be completely useless for this. ^_^;
@BakuyaTheMawile: Are you sure the 3DS is connected actively to the internet through the PC, for certain? (I make sure by removing the last digit of any other connections saved in the 3DS, so I can restore them later) Also, are you sure you're scanning the correct Adapter? It has to be the one the 3DS is connected to (wifi), not any other.
I can't say for sure, as I don't know the inner workings of it all, but I'd suggest this: Try it with all your extra wifi stuff off (no uTorrent, firefox, messengers, etc.), just have the 3DS going through it. I base the suggestion on the way it's worded; it sounds like it's trying to pick it out from too much data.
deviruchi: ...yes. You have to have at least one unconnected wireless adapter (in addition to your wired/less one that provides you internet).
Also, simply that it can detect wifi doesn't mean anything helpful, since if it's not wifi-capable, it'd be completely useless for this. ^_^;
@BakuyaTheMawile: Are you sure the 3DS is connected actively to the internet through the PC, for certain? (I make sure by removing the last digit of any other connections saved in the 3DS, so I can restore them later) Also, are you sure you're scanning the correct Adapter? It has to be the one the 3DS is connected to (wifi), not any other.
I think BTM is having the same problem I am, in that the adapter box is blank and doesn't give us the anything to select so it doesn't scan
Does anyone know the fix for failed connection test? I'm pretty sure I've done everything right. I've disabled firewall, done cmd and everything I've seen in this thread that's a possible fix but I still cant get it to work.
Since, I can't get this thing to work properly for myself, Is anyone willing to check a box of eggs for me?
Since, I can't get this thing to work properly for myself, Is anyone willing to check a box of eggs for me?
Last edited:
the only way to get a wireless card is to buy it online right?
That, or if you have a computer store in your area that sells them.
I had this same issue, deleting all the other network connections and going to instacheck and clicking "start scanning" worked for me. Also, I've heard of selecting "Microsoft - Wireless Network Connection" in the drop down above "start scanning" being helpful for some people. I hope this helps.
Also, does anyone have the SVs of 1610, 2835, or 3245? If so then if you could send me a message that would be great.
Does anyone have the SV of 3696? I need an egg hatched, please help me out.
Also, my SV is 2000. Wondering if the is a list of SV of members on this site. If so, gimme a link. If not, anyone interested in starting one?
Also, my SV is 2000. Wondering if the is a list of SV of members on this site. If so, gimme a link. If not, anyone interested in starting one?
When it's blank like that, Winpcap didn't install correctly. Did you have any errors while installing? If you had any errors about packet.dll or wpcap.dll try this, and then reinstall.
Go to C/D/Whichever drive you use->Windows-> SysWOW64(System32 you're using the 32bit version of windows)-> Find and delete/rename "wpcap.dll" and "packet.dll"
Reinstall WinPCap
- Status