This error is typically realted to firewalls or AV programs, so I'm glad you ruled that out. Check your physical wireless networks properties and make sure the sharing is enabled.
-
Welcome to Smogon! Take a moment to read the Introduction to Smogon for a run-down on everything Smogon, and make sure you take some time to read the global rules.
Instacheck Hotspot -- a fast Pokémon checker for XY
- Thread starter ΩDonut
- Start date
- Status
can someone send me the link to the smogon data base for TSVs
*****Just making a list of some great troubleshooting steps, ignore this tell im done lol
When all else fails....
When all else fails....
Last edited:
Help me please! im still encountering the same error, i already tried restarting my laptop downlaod new instacheck and remove the old one but still, aive done this process including the run cmd codes about 5 times alrady can you guys help me... im willing to hatch eggs for you guys its 5;42am in my country heres my fc 1005-9974-8003 my sv 1536
Attachments
:\
I have to get going right now, but I'll be back around six! Hopefully I can get this working. I have too many eggs to check for me not to get this going.
I have to get going right now, but I'll be back around six! Hopefully I can get this working. I have too many eggs to check for me not to get this going.
thats my trainer code my egg is 2177 i managed to hatched a 2 dozens of egg, im breeding a new batch now
Add me :)
Okay, let's see if someone can help me, cause I've spent all the afternoon trying to figure out ways to make this work.
At first I was trying to "confuse" the program into thinking I had 2 wireless devices in my laptop, even tho it only has one. After trying many solutions which didn't work, I've come to one that I'm sure has to eventually work.
I have an old wi-fi router which I used to use connecting it to my modem to share wi-fi. And my PC has two ethernet cards. So my current router is connected to my pc via ethernet, and I've connected the other router (which is rather an access point) to my other card. That should leave me with a ethernet entrance, and a wifi exit. Since the second ethernet card is connected to a wi-fi emiting device (the router).
In fact, I can even connect to the access point from other laptops, and access the internet from it (laptop -> access point -> PC -> router -> internet). Which means, of course, that I'm sharing my "real" internet connection.
Sadly, that doesn't work for Instacheck. It seems like the Virtual Router Plus doesn't see my second ethernet card (connected to the wireless access point) as a wi-fi device, and thus won't let me broadcast wi-fi from it.
Any suggestion? Maybe turning the access point's wireless network off to let instacheck create its own? Even tho I don't think it can configure the access point itself...
At first I was trying to "confuse" the program into thinking I had 2 wireless devices in my laptop, even tho it only has one. After trying many solutions which didn't work, I've come to one that I'm sure has to eventually work.
I have an old wi-fi router which I used to use connecting it to my modem to share wi-fi. And my PC has two ethernet cards. So my current router is connected to my pc via ethernet, and I've connected the other router (which is rather an access point) to my other card. That should leave me with a ethernet entrance, and a wifi exit. Since the second ethernet card is connected to a wi-fi emiting device (the router).
In fact, I can even connect to the access point from other laptops, and access the internet from it (laptop -> access point -> PC -> router -> internet). Which means, of course, that I'm sharing my "real" internet connection.
Sadly, that doesn't work for Instacheck. It seems like the Virtual Router Plus doesn't see my second ethernet card (connected to the wireless access point) as a wi-fi device, and thus won't let me broadcast wi-fi from it.
Any suggestion? Maybe turning the access point's wireless network off to let instacheck create its own? Even tho I don't think it can configure the access point itself...
Lmao i just realised that i can only keep instachecker up for 30 minutes at a time then i have to remove my wifi USB stick and stick it back in and then works, does this happen to anyone else?
Is anyone free to check some eggs?? Please send me a PM if you can help.
I can only get it working for a few minutes at a time before I have to close the hotspot and restart it. I think it might be a problem with my card though. It drops the signal every now and then if I use wifi normally.
lol! I blame your wifi stick =P I've never had good luck with usb wifi sticks.
Not going to lie....this sounds like a nightmare.... lol! Why do you have two network cards? Are neither of them wireless cards?
looking for people with the following tsv
2290, 2817, 3259, 3245, 3084, 2247, 2285, 1022, 1613, 1370, 3495, 1819, 2087, 861, 1669, 3733, 997, 1858, 3353, 2713, 2743, 3865, 369, 3677, 2763, 1136, 2166, 3993, 732, 1553
im trying really hard for a shiny mienfoo xD
2290, 2817, 3259, 3245, 3084, 2247, 2285, 1022, 1613, 1370, 3495, 1819, 2087, 861, 1669, 3733, 997, 1858, 3353, 2713, 2743, 3865, 369, 3677, 2763, 1136, 2166, 3993, 732, 1553
im trying really hard for a shiny mienfoo xD
It's surprisingly quick. 5 seconds should be good I think
As soon as you show it, the information is recorded. You can show them as fast as you can.
Ok, could there be a download for JUST the Checker? I already use 3DS HomePass using my PC's port, so I don't need that part of the program (which I can't get to run anyways; it won't let me select my internet connection! It insists on using my 3rd port [then gives a
The system cannot find the file specified. (Exception from HRESULT: 0x80070002)
as well as VirtualRouterPlus can't be started message]! Which I won't remove, since then I'll lose my HomePass and go through heck to restore, AGAIN [So many Blue Screens...]).
The system cannot find the file specified. (Exception from HRESULT: 0x80070002)
as well as VirtualRouterPlus can't be started message]! Which I won't remove, since then I'll lose my HomePass and go through heck to restore, AGAIN [So many Blue Screens...]).
I was wondering about this as well.
Nope, and I got 2 because I had a spare one from an old computer and I plugged it in xP
I also got 3 hard drives inside the tower... I like to reuse stuff.
Lol do you have 1496 again?
- Status