I'll clarify what I said before - I found the frame on the DPPt Time finder, Not in the main window, Just like in the Guide. I presume that is why I cannot see this feature. How would one get the frame from the DPPt Time Finder window to the main RNG Reporter window?
-
Welcome to Smogon! Take a moment to read the Introduction to Smogon for a run-down on everything Smogon, and make sure you take some time to read the global rules.
Most Generation PRNG Help / Information
- Thread starter mingot
- Start date
I'll clarify what I said before - I found the frame on the DPPt Time finder, Not in the main window, Just like in the Guide. I presume that is why I cannot see this feature. How would one get the frame from the DPPt Time Finder window to the main RNG Reporter window?
Just enter the Seed in, the Nature/ Synch Nature, Stats,( Im pretty sure that it should be on Method J ) and a list of Frames Should come up, Right Click on those and there will be the Encounter Slot option :D
Ok, I'm starting ot get it. It says the encounter slot is 4 but that corresponds to Bronzor, I need to somehow choose a seed that corresponds to 2. Is that correct?
Yup 2, 6, 8, or 10 because those ar Gibles Encounter Slots :)
OR you could try my suggestion and use a synchronizer. My shiny spread appears in only 1 frame w/o a synch. However, with a synch it appears on 12 frames which cover just about every encounter slot.
So this is the best Timid HP Ice spread?
3540916513F 46f43bca (TIMID, ability 0) 31/22/30/31/31/31 (Seed: a21504f7 Frame: 240) HP ICE 70
3540916513F 46f43bca (TIMID, ability 0) 31/22/30/31/31/31 (Seed: a21504f7 Frame: 240) HP ICE 70
What is the difference between frame and actual? Because I have hit my delay and do not know what to go for, 57(Frame in both Time Finder Tab and main window) os 102 (Actual)?
Say it's 57. Would the calculation be
57 - 2 - 0(no roamers) = 55
Or
102 - 2 -0 = 100
Yes use the Frame, not the Actual, So if your Frame was 57 then yes your correct ( 57-2=55 now thats uneven so turn once, do not take a step but turn once. Which advances the frame by 1 which would leave you with 54 then divide that by 2 which would be 27 Joural Flips with a caught or defeated poke on it
I've been wondering the exact same thing.
Here's what I've been using because I haven't gotten around to learning to use Emloop to hit high delays yet...
TIMID 30 / 3 / 30 / 31 / 31 / 31 HP Ice 70, (Seed c0102be, 01:11:00, 2098-01-01=Delay-604, 2082-01-01=Delay 620, Method 1 Frame 7129, Method J Requires Syncher Frame 7120/7122/7124)
I'm really proud of my Zapdos and Azelf I used this for, but having to do 3557 journal flips really sux. I've hit it each time so far, but meh, you know...
Anybody got anything better?
I get odd with my Sapphire game inserted.
Okay, something VERY weird is going on. I've been trying to check my delay with RNG Reporter's Seed Finder, and every single time I try, it tells me that no combination could be found. I've done this literally hundreds of time before, and have never had this happen. I double-check the date and all the Pokémon info, and even though I took note of the time I reset, I try the adjacent minute just in case. I'm positive I have the right numbers. I tried a completely different date and time on my DS. I've restarted my computer. Still, no luck whatsoever. Any advice?
Are you using stats or IVs? I suggest using IVs if you can, JRT was having a similar problem.
Heh, I just replied to your PM and mentioned this in it... looks like you're way ahead of me! I'm using stats. I have enough Rare Candies to check IVs, so I can go ahead and try that. Still, I'd definitely like to know what the deal is, as I've always used stats and have never had a problem.
EDIT: Yep, that worked. Thanks!
what do you mean? all chained pokemon? or all pokemon in one chain?
Forget my last question I have a more important one, how do you increase your delay to a specific number say 594 to 640 when you're supposed to hit a specific second like fifteen but, I've found during my calibration phase or RNG abuse that my delay range is 594-598 and my seconds are a consistent 15, so how do I do this?
Ok what the heck. I finally hit my delay again (this time it was 2384), but I did not get my ivs. The seed gives you a frame of 24, I have 3 roamers, so I should have to do 10 journal flips. But, I don't know what went wrong. Besides that, the reporter seems to be a bit jumpy with my seconds off 44 in there. One minute 2010 has 2378, then 2010 has 2380. Though my time is 2008 11 14 16:53:44 2384. Could someone take a look at this seed and help me figure it out: fb100958
Also the wierd thing is for a wondercard that has random natures, it sure didn't mind being impish and somewhat of a clown twice in a row.
Also the wierd thing is for a wondercard that has random natures, it sure didn't mind being impish and somewhat of a clown twice in a row.
Why are you using a seed which requires such a ridiculously high delay?
Change the year. Play with it in the "seed to time" window and you will see how it works.
The don't have to be in the same chain. It just needs to be a number of chained shiny Pokemon from the same game. Four might work, but the more the better.
Why are you asking such a question? From what I've gathered, it doesn't matter the height of the delay. I know someone in particular that has had a delay in the 2000's. That's just how high that seed is. Though you're asking that, because it really is more difficult to hit a delay that high, then I can understand why you asked.
I still don't know why I did not get my spread even though I hit my target time and delay, not to mention the journal flips had to be right.
Well the last time I had tried emloop the first time I had a delay in the 1000's but I messed that up and just left it alone so I assumed the problem was just me. Though this is the first time I made it to the adjusted delay stage. I don't really know the difference between delays of 1000's and 2000's. But would you suggest that an emloop beginner like me would benefit more from a delay of 1000's (maybe hit that even much better)?