Ignore the actual. The actual is the method 1 frame.
-
Welcome to Smogon! Take a moment to read the Introduction to Smogon for a run-down on everything Smogon, and make sure you take some time to read the global rules.
Most Generation PRNG Help / Information
- Thread starter mingot
- Start date
Ignore the actual. The actual is the method 1 frame.
OK, I have been able to get up to changing the DS date and then starting the timer. Everytime, however, I am off by at least 3 seconds (usually six). I know I am hitting continue pretty much right when the timer hits zero. Is there anything I can to to fix this? Also, how important is it to SR exactly when the timer hits zero? As important as when you hit continue for when the timer hits zero?
Also, my delay is 2332
Also, my delay is 2332
If you SR too late, your delay will be too low. If you SR too early,y our delay will be too high.
I believe it will still hatch shiny, but yes if it is frame 7 reject the first 6, why don't you just try to find a lower frame?
Is there a bettar way than calibrating to get used to hitting the same delay?
I'm trying to RNG a shiny beldum for someone with another game, so instead of using my ID and SID in shiny finder I'm using my theirs. 3 times now I've hit the correct time, delay, flips, and taps only to have the egg show up timid(all 3 times) when I was going for adamant. Is there anyway to do what I'm trying to do?
(Ive used shinyfinder successfully for myself multiple times so I'm positive Im not doing anything wrong as far as instruction goes)
(Ive used shinyfinder successfully for myself multiple times so I'm positive Im not doing anything wrong as far as instruction goes)
haha i just did that and i was like damn the next one i will get it then it said i hit it! then i followed until frame 70 (my latios is frame 71) and then i talked to latios as fast as possible and i got a careful one when even my synch was timid and i was like you know what? im just gonna do it on mewtwo instead cause there are too many NPC's in pewter city.
I'm trying to RNG for a Kyogre on my English Heart Gold version. I've calibrated (my seconds is 17 with the AR, sorry I can't press A very quickly), got my min/max delay, got my maximum frame, I went to the time finder to find the spread I want, I've went to Seeds to Times to find my date, time and target delay. I use Emloop as the timer, and I click Confirm 1 minute before my target time on my DS, and start on the Emloop at the same time. I then go into the game like I'm supposed to. I soft reset exactly when the first timer hits 0, and then click Continue and go into the game at the exact time that the second timer hits 0, but my time everytime is different. For example, since my seconds is 17, my time is 04:54:14, even when I enter exactly when the 17 seconds reaches 0. I even have an RNG tutor (Skymin_Flower) to help me, but it still doesn't work.
Can anyone help?
Thank you!
-ShinyAzelf
Can anyone help?
Thank you!
-ShinyAzelf
First and foremost: use pikatimer. Your delay comes into account so just reseting one minute before and then pushing A at 17 seconds doesnt usually work. But pika timer has eveything you will need and you can even adjust the pikatimer with the other delays you come up with
Ok I'm trying to breed RNG in Soul Silver, but I'm not coming anywhere near my target delays or second (I've got the max variance in delay/seconds in RNG Reporter, but it still cant find my Elm responses). I've followed everything else to a T. What gives?
E: And yes, I am using Pikatimer
E: And yes, I am using Pikatimer
then go catch a pokemon (preferably level 50 or above but if you have a way of checking IVs at low levels then anything will work) and use seed finder to find what seed you are hitting and adjust accordingly, it's really not that hard to figure out.
Ok, not to be rude or anything, but I don't like being talked at. Especially when this is my FIRST TIME DOING THIS.
Anyways, back on topic. I've followed all the steps so far (from both my RNG tutor CPrime and bearsfan092's videos), and everything says that I should be hitting this seed, but I'm nowhere near it. Why is it off by so much?
Anyways, back on topic. I've followed all the steps so far (from both my RNG tutor CPrime and bearsfan092's videos), and everything says that I should be hitting this seed, but I'm nowhere near it. Why is it off by so much?
Ok. Quick and easy question. Once JavaRNG makes the files that have the information in them, which one do I use. Because I am getting two files that give different delays for the same seed. In one I only have a single option (25 frames) but in the other I have the option of 1 frame up to 135 frames for the same seed. Do I go with the 25 frame one?
If your results are way off or you're not getting any results, then you did something that wasn't following the steps. That is the first thing you must understand to continue forward. Recheck everything, dates, times, on RNG Reporter and the DS. Roamer Positions, whether you did all the steps necessary to even RNG on Soulsilver. Start from the beginning and double check everything. Second, when you've done all that and still don't get results, change your seed. Just changing the seed can make the difference between success and fail. Last, get used to trying things over and over again. RNG is about repetition. You try again, you read the guides again, you see what you did wrong or should have done differently and you RNG again.
Just to clarify, I am to push the a button when the second timer reaches zero when I am at the continue screen right? Not when I am at the press start screen?
ok, if im off by a few seconds and by a few delays, what can I do to accommodate for that? I am using Pikatimer, by the way
We are both having that problem.