Destiny100 said:I'm confused with emloop :S
It says I quote
Step 3:
Press the blue button on emloop, and note the value that appears in the yellow box. This is your delay converted to seconds, and is necessary for finding a proper date/time combination in RNGReporter.
Ignore anything after the decimal place, it's only the first two numbers that matter. Don't round, just cut them off. In this case, I would simply be using "12."
Step 3.5:
Not a requirement, but this can make things a lot less difficult in certain situations.
If the value you get for seconds is dangerously close to the next whole number (to be safe, anything that's .8 or higher), I would add 0.2 to the green box (so, enter 60.2 instead of 60) and use (seconds +1) as the value to look for in RNGReporter. This minimizes the effects of not resetting your game and starting Emloop at the
exact same time, as it gives you closer to a whole second's margin of error, as opposed to at most 0.2 seconds.
For example, if my delay converted to 12.87 seconds, I'd enter 60.2 in the green box and search for things with a seconds value of 13 in RNGReporter.
On RNG reporter at the moment I have (on seed to time option) Date, Time and Delay.
I normally take 14 seconds to enter the game but i says I should replace that with my value in the yellow box? O_o, so I should have Time:11? How do I enter the game in 11 seconds? using
Syberia's guide
Here's my seed
c21102ab
EDIT: oh wait XD, I change that later on =)
Yeah don't worry, this confused me too.
As you know entering the game the fastest you can get (on an actuarial cartridge) is around about 14 seconds with a delay of about 600~ (Platinum, it's more for others).
Basically you've picked the delay you want to reach (if you can post it in a reply that will make it easier) using the seed to time function of RNG reporter, thats given you a number which you stuck into Emloop and generated. For example, i'm trying to hit the flawless timid spread with a delay of 640. Emloop says 10 seconds which seams impossible.
What you have to take into account is you 'White Screen Delay', that is when you soft reset, the screens on your DS turn white. Now, your delay only starts counting the moment you screens go black. So you need to work out how many frame that is, and add that to any delay your trying to hit.
Still using the 640 example, my platinum has a white screen delay of 260, so I add that to the delay I want and I get 900, so I put that into Emloop which in turn tells me 15 seconds. I then look for times with 15 seconds as the value (something like 21:59:15). So then I go through the process of using Emloop to time my Soft Resets and when to hit A on the continue screen, which if all done correctly lands me my desired seed.
Okay, so how do you work out your white screen delay? My method is to stick 1000 in Emloop, and time My soft reset and pressing A, then immediately fishing and capturing a Lv.50+ Magikarp to check my seed. This will give you a delay noticeable under the 1000 you put into Emloop (probably 800~). Just do that a few times to work out your average, and then add the difference to the number you entered in Emloop (for me 1260), which when entered into Emloop gets me that delay of 1000.
The more times you do it, and often it's best to check after SRing in front of a poke you want (just fly to the karp pond and check your seed), to really get the exact number wound down tight. For example my WSD is exactly 133 frames for my Soul Silver game. You should note that your WWSD will be a lot lower for flash carts then for real pokemon game cartridges.
Matt