• Check out the relaunch of our general collection, with classic designs and new ones by our very own Pissog!

5th Gen PRNG Help / Info - Latest: RNG Reporter 9.96.5, PPRNG 1.15.0

For DW, I have to do C-Gear abuse, I knew that already. But, for what frame will I be looking? And I'm having 2 timer, what do I do when the first timer runs out, and what if the second runs out?


Entralink RNG normaly begins in frame 21 (I usually choose frames that are above 21).

The first timer is the time when you'll boot your game (I use flashcart, so I softreset at the end of the first timer). Like Sephirona said:

The second timer will start automatically when the first timer reaches 0. Before the end of the second timer, you should already be in-game with your C-Gear turned on, and have tapped the Entralink button and be waiting at the “(Your name) warped to the Entralink!” screen. At the end of the second timer, press A at this screen. You will then enter the Entralink.

Link:http://www.smogon.com/forums/showpost.php?p=3159941&postcount=2
 
Pokemon Black
Seed: D79F43D48579D0EE Initial Frame 1 (4/9/2096) 22:23:56 (I delay by one second)
Timer C7B-C7C Starting PID: 46 (confirmed)
What I'm going for: A shiny Axew in Mistralton Cave, at a frame of 654 at an ESV of 5 and should be Lv 30 with Mold Breaker (Ability 2) and male.
Yet, I am getting a Woobat, Lv 30 Quiet of the correct spread with its second ability, and since it is Lv 30 it is ESV of 3. I searched the nearby PIDs but couldn't find a match, and I went all the way from 654 to the 400s, and even the 900s.
Method of frame advancement: Turning in place.
I don't have Chatots, so please don't tell me to go use them. I just need to know what PID frame I am getting
Bumping my post…… kinda frustrated here.
 
alright so im trying to RNG a shiny wild roggenrola and having some trouble

White version
full seed:7BE386AC93E7A982
target time:6:07:53(starting the game at 6:07:52)
Timer0:C7E
Starting PID: confirmed to be 47
keys:A+Up
MAC address:001F32091E42
Non-Cgear
Vcount:60 VFrame:6 GxStat:6
Target ivs:31/31/30/22/31/31

Now my nearest shiny is 181 so 181-47=134 chattot chatters right? well after hitting my seed and doing my chatters i keep getting the wrong pokemon with the wrong ivs. why is this happening? i know im hitting my seed for sure.

hopefully some1 can help me soon...
 
Can someone help walk me through in getting a shiny flawless Virizion? I already found a good time and iv spread. It has an IV frame of 1 as well. I just don't know how to do calibrate the PID since I keep getting Jolly nature due to my sync. Should I just take the sync out of my first slot?

PM me and if we get this right, I'll reward you with semi redis rights for it.
 
yeah its a frame one seed. im pretty sure im hitting it cause i know exactly when to start it at and doing that. what should i do about the timer0? ive used this seed on stationary legends before using the correct encounter and it worked.
 
On route 1, do the seasonal leaves affect the PIDRNG? I know there is a random moving NPC on that route, but I'm not sure about those leaves. I'm looking into getting a Shiny Milotic, hence why I'm curious.

Also, does anyone have any clues on how to avoid the fog around the Giant Chasm? I've seen videos where people have encountered no fog in that area.

Just to reiterate: do the leaves on route 1 affect the PIDRNG?

I did notice Buckert was asking about the fog in the Giant Chasm as well. There has to be a way around it. The Birthday trick does not work for that area.
 
Can someone help walk me through in getting a shiny flawless Virizion? I already found a good time and iv spread. It has an IV frame of 1 as well. I just don't know how to do calibrate the PID since I keep getting Jolly nature due to my sync. Should I just take the sync out of my first slot?

PM me and if we get this right, I'll reward you with semi redis rights for it.

You can use the starting frame guide in my breeding guide. The inheritance stuff won't be useable, obviously, but you can still deduce it with the IVs/PID.
 
You can use the starting frame guide in my breeding guide. The inheritance stuff won't be useable, obviously, but you can still deduce it with the IVs/PID.

Ok, so it's the 6th post I assume? So that means I treat the sync like an everstone pokemon?

So do you use the PID for shininess?
 
Ok, so it's the 6th post I assume? So that means I treat the sync like an everstone pokemon?

So do you use the PID for shininess?

Treat the sync like an everstone.
So basically look on the Method 5 PIDRNG list for Jolly and convert the PIDs to decimal, mod them by 6, and then use that with your IV spread to match characteristics to your caught Virizion.

6th post explains all the details.
 
Treat the sync like an everstone.
So basically look on the Method 5 PIDRNG list for Jolly and convert the PIDs to decimal, mod them by 6, and then use that with your IV spread to match characteristics to your caught Virizion.

6th post explains all the details.

ok, thanks. I'll tack on this Virizion then, and hopefully it'll be shiny by the end of the week.
 
Having a lot of trouble with the Larvesta Egg...

found my 31/31/30/31/30/30 HP Rock 70 on 1/02/2011, 10:04:26, Frame 2 (Larvesta Egg starts on frame 2 right?). Timer0 is C85, which worked fine for me RNGing Terrakion no problem.

I save in front of the red guy, start up at 10:04:25 for the one second offset, grab the egg and hatch it. Two were adamant, one Lonely, corresponding with what the blue-hair NPC is doing when I start the game (stepping down or to the left).

However, I can't seem to figure out where the IVs are coming from. Instead of my IV frame, I get something like 31/10-13/28-29/0-9/28-29/25-29.

I've searched all timer0 values near C85, but I can't find that spread showing up on 1/02/2011 at 10:04:26 for any values of any parameters (no keypresses for all of this btw).

Where could these IVs be coming from?
 
When trying to set IVs for a roamer (I know I'm out of luck for the nature), do you get to your proper frame in the house and step out, or do you need to calibrate somehow?
~Uiru
 
If it fluctuates between more than 2, PROTIP: Buy the game.

thats whats confusing me. what do you mean by the first part(not the protip part unless thats important too)

It means that you should only have 2 timer0's, if you do you shouldn't be complaining.

Having more than 2 indicates you are on a flashcart, if you can't tolerate the timer0 discrepancy, you should buy the game.

Post 3 also says YOU CANNOT CONTROL TIMER0, in size 5 bold.

if that doesn't help you realize what is going on..
you can't do anything about timer0

"what should i do about the timer0?" is what you asked.

Please read the posts rather than skimming, it saves a lot of time.
 
So I'm breeding a modest jellicent. The parents have a 31/31/31x/31/31 spread, are both modest and have an everstone. In my rng reporter, I have bw breeding and have selected gift pokemon and everstone nature. The first possible nature would be the 8th frame or does the rng reporter take care of that with the first frame being the 8th?
 
So I'm breeding a modest jellicent. The parents have a 31/31/31x/31/31 spread, are both modest and have an everstone. In my rng reporter, I have bw breeding and have selected gift pokemon and everstone nature. The first possible nature would be the 8th frame or does the rng reporter take care of that with the first frame being the 8th?
The frame 8 thing is for IVs not natures. Your PID frame (for natures and other stuff) starts between 40-60 usually.
Search for the spread you want in the time finder. Set min/max frame to 8. Once you find a seed that you want to use go to the main window in RNG reporter, input the seed where it says seed (hex) and set the method to breeding (BW). Select all the other stuff that applies (everstone, ditto, etc) and then generate. Then hit your seed, get the egg, hatch it and find your starting PID frame in RNG reporter. Do it again, (do not resave, just turn off the game) make the necessary advancements to get the nature you want.
 
So I'm breeding a modest jellicent. The parents have a 31/31/31/X/31/31 spread, are both modest and have an everstone. In my rng reporter, I have bw breeding and have selected gift pokemon and everstone nature. The first possible nature would be the 8th frame or does the rng reporter take care of that with the first frame being the 8th?

thts determined by the PIDRNG. The MTIVRNG controls IVs, that one starts on frame 8. You have to calibrate to find ur initial PIDRNG.
 
Alright, so I'm trying to RNG capture the Volcarona from the Relic Castle. I'm aiming for a shiny spread of 26/31/30/31/26/30, and attempting to hit the seed to figure out which frame I'm starting on. For some odd reason, when I hit my time, I usually get an IV spread of 26 / 10 - 11 / 16 - 17 / 20 - 21 / 13 - 14 / 18. I'm doing the steps correctly, and I've only land on the spread I've aimed for a few times. The nature is always inconsistent when I do. I haven't ahd a problem with this in the past when RNGing other stationary Pokemon. Can somebody help me with this?
 
Your timer0 is probably giving you troubles, just keep at it. Also, make sure you're moving the exact same path every time, if you need to advance the IV Frame, if you don't it'll mess with your results.
 
Your timer0 is probably giving you troubles, just keep at it. Also, make sure you're moving the exact same path every time, if you need to advance the IV Frame, if you don't it'll mess with your results.


So if you have a problem with a shiny capture and you know you hit your seed and did everything right just keep at it even though your timer0 is messin with you?
 
Back
Top