Actually, it should be. It previously used the wrong information (DS instead of DSi) when calculating seeds, so it should be fixed now.i guess the rnging ID in dsi problem is not solved in this version right?
It's even easier than that. Try right-clicking the Gender Ratio box in the Time Finder.whoa, this new version is godly!
one thing: can be found somewhere, in the RNG reporter, the gender ratio of each pokemon? 'cause I've never seen it anywhere. I have always to check on bulbapedia.
it would be very useful if it could be found in the "pokedex-iv checker" window.
Where I can find this Time column??- Added: Time column to Entralink encounter type, making it possible to aim for a specific nature on Entralink Pokémon
uooooooooooooo but you're a god!!!!!!!!!!!!It's even easier than that. Try right-clicking the Gender Ratio box in the Time Finder.
after selecting method "gen 5 PIDRNG", select "entralink pokemon" as encounter type.Where I can find this Time column??
...no.Anyway I got a question: according to one guide I should just be pressing 'a' when I hit my seed and then 'xba' befor advancing. Is this right?
Gen 5 PIDRNG -> Select Entralink encounter type.Where I can find this Time column??
So should I be pressing 'xba' both when I hit my seed and when I'm advancing?...no.
Gen 5 PIDRNG -> Select Entralink encounter type.
It could just be me not understanding the guide, rather than it being misleading... just follow the links down the end of the page where it says shiny, flawless eggs:... where's that misleading guide??
You don't press them all at once; you press them separately at different times for different reasons.It could just be me not understanding the guide, rather than it being misleading... just follow the links down the end of the page where it says shiny, flawless eggs:
http://thegamingforum.org/forum/f11...neration-rng-abuse-section-3-calibration-226/
Are you doing a stationary Amoonguss (the ones from item balls) or a random wild encounter? If it's a stationary one, then you need to use the Stationary encounter type and you don't need to bother with encounter slots at all.I'm trying to get (Standard Seed) a stationary in BW, i have already my parameters, and i was looking for a good spread. The page linked in the RNG says this (sry for the bad pic), so i picked 3 as Encounter Slot. No results in 2012, so i tried 2011, with these parameters, and that spread came out. Is that ok or i did something wrong? These Encounter Slot stuff are totally new to me
How does that work? I still get a message saying I need to input the Full Seed from Time Finder.Gen 5 PIDRNG -> Select Entralink encounter type.
You need to convert it into a Standard Seed for it to work.How does that work? I still get a message saying I need to input the Full Seed from Time Finder.
Seed: B9E444FD
Basically found out what time you get/hit when entering into the game and use that with the simple seed generator to generate a standard seed.-> extrapolate backwards to the Standard Seed Time
-> Simple Seed Generator to generate your Standard Seeds according to that Time
Since at most you have two timer0 going on, use Parameter search to figure out what Timer0 you'll getting at the time.-> Find out which one you hit with a Parameter Search at that time (what timer0)
-> This is now the Standard Seed for the method
O_o I don't understand that at all. LolYou need to convert it into a Standard Seed for it to work.
Basically found out what time you get/hit when entering into the game and use that with the simple seed generator to generate a standard seed.
Since at most you have two timer0 going on, use Parameter search to figure out what Timer0 you'll getting at the time.
Ask Kaph, PoJ, or even OD to better classify what I said. I was just as confused as you was when PoJ explain it to me.O_o I don't understand that at all. Lol
oh thats so great thx OD and everyone :)Actually, it should be. It previously used the wrong information (DS instead of DSi) when calculating seeds, so it should be fixed now.
It's even easier than that. Try right-clicking the Gender Ratio box in the Time Finder.
Basically, you need to figure out the second you started the game, as if you were doing a standard seed. Turning on the C-Gear only redoes the IVRNG, the PIDRNG uses the original seed.O_o I don't understand that at all. Lol
And how do I find that out? And do I need to hit my delay?Basically, you need to figure out the second you started the game, as if you were doing a standard seed. Turning on the C-Gear only redoes the IVRNG, the PIDRNG uses the original seed.
Should just be the minute you start from plus the length of the first timer (possibly give or take a second, if it's near a second change). You still need to hit your delay, or else you'll get the right nature but the wrong IVs.And how do I find that out? And do I need to hit my delay?
O_o I don't understand that at all. Lol
Research post with a full guide and explanation will be up later today, but for now --Ask Kaph, PoJ, or even OD to better classify what I said. I was just as confused as you was when PoJ explain it to me.
Okay, this may sound incredibly stupid, but how do I make sure I hit the IVs? Wouldn't turning the C-Gear on reseed the IVRNG?Research post with a full guide and explanation will be up later today, but for now --
You need to take the time and delay of your C-Gear seed and work backwards to find your Standard Seed.
1) Before you attempt this, move all Entralink Pokemon except your target into the Deep Clearing. This minimizes the effect of randomly moving Pokemon on your timing.
2) Let's say I have a C-Gear seed with a date of 2\14\2012, a time of 3:59:57 and a delay of 5623. Each delay is 1\60 of a second, so we need to divide it by 60 to get the total number of seconds. 5623 / 60 = 93.7 seconds.
3) Subtract 93.7 seconds from my C-Gear seed time to get the time of the standard seed, because that's when delay starts counting. 3:59:57 - 93.7 seconds = 3:58:23
4) Plug the date, time, and your DS parameters into the Adjacent Seed tool (under the 5th Gen Tools menu), and click Generate. You'll be given a list of standard seeds. Seeds in white have your target seconds; seeds in grey are adjacent seconds and\or Timer0s. The tool will also give you Chatot pitches for each seed so you can verify your seed.
5) Plug the seed in the main window, with Gen 5 PIDRNG and Entralink Pokémon selected. Calculate the initial PIDRNG frame. Look for a frame that has the nature you want, but also gives you enough time to get into the Entralink. (50 seconds minimum is ideal.) It also should not be on a "skip" frame.
6) When doing your Chatters to verify your seed, you must do them in a multiples of 3, otherwise the timing and skipped frames will change.
7) When you turn on the C-Gear, that is when you must start keeping track of time. Enter the Entralink when necessary.
8) Move to the forest as quickly as possible and then talk to the Pokemon to stop it from moving. Wait until the timer says you have reached your target frame, then select "Yes" to encounter your Pokemon. If you were successful, your Pokemon should have your desired nature. If not, the moving Pokemon's advancements may have messed up your frame.
I'm not sure exactly what you mean. You just hit your delay like normal.Okay, this may sound incredibly stupid, but how do I make sure I hit the IVs? Wouldn't turning the C-Gear on reseed the IVRNG?
Meh, I'll just wait for the guide. I'm too confused right now.I'm not sure exactly what you mean. You just hit your delay like normal.
Dude... this technique is for Entralink Pokémon. You're forced to turn on the C-Gear in order to get into the Entralink in the first place.Okay, this may sound incredibly stupid, but how do I make sure I hit the IVs? Wouldn't turning the C-Gear on reseed the IVRNG?
This guide had all the necessary info. If you're confused by this, then I'm afraid my later research post will not help you either.Meh, I'll just wait for the guide. I'm too confused right now.